Eighteensound ND2080 2.0Inch Hochtontreiber 16 Ohm 18-Sound
The ND2080 2-inch exit high frequency compression driver has been designed for high quality sound systems application. The titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome on its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. The ND2080 powerful neodymium magnet assembly has been designed to obtain 22KGauss in the gap for major benefits in transient response. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effect and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. Due to the increasing use of high power audio systems at outdoor events or in marine environments, the ability of equipment to perform properly under inclement weather conditions is a key feature of Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers. | |
| Throat Diameter | 50 mm (2.0 in) |
| Nominal Impedance | 16 O |
| Minimum Impedance | 10.2 O |
| Nominal Power Handling | 100 W |
| Continuous Power Handling | 200 W |
| Sensitivity | 110.0 dB |
| Frequency Range | 0.5 - 20.0 kHz |
| Recommended Crossover | 0.8 kHz |
| Voice Coil Diameter | 75 mm (3.0 in) |
| Winding Material | Aluminum |
| Diaphragm Material | Titanium |
| Flux Density | 2.2 T |
| Magnet Material | Neodymium |
| Overall Diameter | 131 mm (5.16 in) |
| Depth | 99 mm (3.9 in) |
| Net Weight | 3.4 kg (7.5 lb) |
| Shipping Weight | 3.5 kg (7.72 lb) |
| Shipping Box | 132x132x103 mm (5.20x5.20x4.06 in) |
- Schwingspulendurchmesser
- 75 mm (3.0 in)
- Frequenzbereich
- 0.5 - 20.0 kHz
- Wicklung besteht aus
- Aluminum
- Empfindlichkeit
- 110.0 dB
- Magnet
- Neodymium
- Nominale Belastbarkeit
- 100 W
- Außendurchmesser
- 131 mm (5.16 in)
- Netto Gewicht
- 3.4 kg
- Dauerbelastbarkeit
- 200 W
- Recommended Crossover
- 0.8 kHz
- Diaphragm Material
- Titanium
- Nominale Impedanz
- 16 Ω
- Versandkarton
- 132x132x103 mm (5.20x5.20x4.06 in)
- Einbautiefe
- 99 mm (3.9 in)
- Versandgewicht
- 3.5 kg (7.72 lb)
- Flux Density
- 2.2 T
- Throat Diameter
- 50 mm (2.0 in)
- MInimale Impedanz
- 10.2 Ω
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.