330,00 €
In den Warenkorb
Eighteensound 12ND610 12Inch Lautsprecher Chassis 8 Ohm 18-Sound
The 12ND610 is an extremely high output neodymium mid-bass transducer perfect for high quality professional systems. It has been designed for midrange and midbass frequency reproduction in horn-loaded, as well as bass-reflex compact enclosures. The transducer's extremely powerful neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling result in the best power to weight ratio on the market today. 12ND610 curvilinear paper cone has been designed by 18 Sound engineers with a special high-strength wood pulp to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. Its cone is capable of carrying significant loadings thanks to a dedicated reinforcing treatment. The cone is carried by a multiroll suspension built from a linen-like material, which is more resistant to aging and fatigue than traditional materials. The 75 mm (3 in) state-of-the-art inside outside voice coil is similar to the one fitted to our top-of-the-range 18" and 15" models but it's wound with aluminum wire. It employs the Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12ND610 far more resistant to the corrosive effects of salts and oxidization. | |
| Nominal Diameter | 300 mm ( in) |
| Nominal Impedance | 8 Ω |
| Minimum Impedance | 4.2 Ω |
| Nominal Power Handling | 450 W |
| Continuous Power Handling | 700 W |
| Sensitivity | 102.0 dB |
| Frequency Range | 80 - 5500 Hz |
| Voice Coil Diameter | 75 mm (3.0 in) |
| Winding Material | aluminum |
| Surround Shape | Triple roll |
| Cone Shape | Curvilinear |
| Magnet Material | Neo |
| Woofer Cone Treatment | Weather protected |
| Recommended Enclosure | 25.0 dm3 (0.88 ft3) |
| Recommended Tuning | 50 Hz |
| Resonance Frequency | 46 Hz |
| Re | 5.9 Ω |
| Qes | 0.15 |
| Qms | 4.3 |
| Qts | 0.14 |
| Vas | 94.4 dm3 (3.33 ft3) |
| Sd | 531.0 cm2 (82.31 in2) |
| Xmax | 3.5 mm |
| Mms | 49.0 g |
| Bl | 24.0 Txm |
| Le | 1.17 mH |
| EBP | 306 Hz |
| Overall Diameter | 315 mm (12.4 in) |
| Bolt Circle Diameter | 296 mm (11.65 in) |
| Baffle Cutout Diameter | 282.0 mm (11.1 in) |
| Depth | 124 mm (4.88 in) |
| Flange and Gasket Thickness | 11 mm (0.43 in) |
| Net Weight | 3.9 kg (8.6 lb) |
| Shipping Weight | 4.6 kg (10.14 lb) |
| Shipping Box | 332 x 332 x 184 mm (13.07x13.07x7.24 in) |
Herstellerinformation
| Marke | Eighteensound |
|---|---|
| Hersteller | Eighteen Sound SRL |
| info@eighteensound.it | |
| Telefon | (+39) 0522 1861800 |
| Anschrift | Via Botticelli 8 1 - Loc. Vallina, 42124 Mancasale (Reggio Emilia), Italien |
| Qts | 0.1449 |
|---|---|
| Verkaufsrang | 148 |
| BL (Tm) | 24.0 |
| Qes | 0.15 |
| Qms | 4.3 |
| Vas (l) | 94.4 |
| Xmax (mm) | 3.5 |
| Fs (Hz) | 46 |
| Empfindlichkeit (dB) | 102.0 |
| Re (Ohm) | 5.9 |
| Sd (m²) | 0.0531 |
| Mms (g) | 49 |
| Le (mH) | 1.17 |
| EBP | 306 Hz |
| Lochkreisdurchmesser | 296 mm (11.65 in) |
| Tuning Frequenz | 50 Hz |
| Surround Shape | Triple roll |
| Dauerbelastbarkeit | 700 W |
| Außendurchmesser | 315 mm (12.4 in) |
| Schallwandausschnitt | 282.0 mm (11.1 in) |
| Einbautiefe | 124 mm (4.88 in) |
| Magnet | Neo |
| Flange and Gasket Thickness | 11 mm (0.43 in) |
| Versandgewicht | 4.6 kg (10.14 lb) |
| MInimale Impedanz | 4.2 Ω |
| Schwingspulendurchmesser | 75 mm (3.0 in) |
| Frequenzbereich | 80 - 5500 Hz |
| Nominale Impedanz | 8 Ω |
| Versandkarton | 332 x 332 x 184 mm (13.07x13.07x7.24 in) |
| Recommended Enclosure | 25.0 dm3 (0.88 ft3) |
| Netto Gewicht | 3.9 kg |
| Woofer Cone Treatment | Weather protected |
| Cone Shape | Curvilinear |
| Nominale Belastbarkeit | 450 W |
| Wicklung besteht aus | aluminum |
| Nominaler Durchmesser | 300 mm ( in) |
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.