Eighteensound 18LW1400 18inch Lautsprecher Chassis 8 Ohm

Artikelnummer: ES18LW1400

Extended LF Ferrite Transducer

Gewicht: 13 kg
Sie sparen: 20%
370,00 €
Mengenstaffelpreise
Von 2 Stück 289,70 €
Von 4 Stück 286,70 €
Von 8 Stück 283,80 €
Von 16 Stück 280,80 €
Sofort lieferbar Lieferzeit: 1 - 3 Tage

Eighteensound 18LW1400 18inch Lautsprecher Chassis 8 Ohm


ES18LW1400

  • 98 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
  • 1000W AES power handling
  • Carbon fiber reinforced straight ribbed cone
  • Double Silicon Spider (DSS) for improved excursion control and linearity
  • Double Demodulating Rings (DDR) for lower distortion
  • Improved heat dissipation via unique basket design and multiple backplate vents
  • Weather protected cone and plates for outdoor usage
  • Ideal for high SPL subwoofer designs

The 18LW1400 is an extended low frequency loudspeaker which sets an industry standard in 18" (460 mm) high performance transducers. It has been designed for use as a low bass or sub-woofer component, in either a reflex, bandpass or horn loaded configuration, in high power auditorium or arena loudspeaker systems. The transducer provides clean, undistorted low frequency reproduction at very high sound pressure levels and is able to withstand high power levels without damage. 18LW1400 design features include a large displacement suspension system which, in conjunction with a carbon fiber reinforced, straight ribbed cone and the Double Silicon Spider (DSS), assure an ultra-linear piston action and provide full control across the entire working range. A 100mm copper voice coil based on Interleaved Sandwich Voice coil (ISV) technology increases this control, providing high levels of thermal stability and durability. ISV technology is based on a high strength fiberglas former with half the coil wound on the outside and half on the inside and bonded together using unique high temperature resin adhesives. Hence, a balanced linear motor unit, exerting an exceptionally high force factor is achieved. The low distortion and unmatched sound quality of the 18LW1400 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to dramatically reduce the intermodulation and harmonic distortion while improving the transient response. Excellent heat dissipation has been achieved from the special basket design which incorporates air channels between the basket and the magnetic top plate. In addition, 8 air vents incorporated into the back plate are aligned with the voice coil to force air into the lower part of the gap. Maximum flux density in the gap is assured by the top and back plate design, resulting in a high BL factor. 18LW1400 is able to perform properly under inclement weather conditions. The exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the cone. In addition, the special treatment applied to top and back plates of the magnetic structure is far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter460 mm
Nominal Impedance8 Ohm
Minimum Impedance6,4 Ohm
Nominal Power Handling11000 W
Continuous Power Handling21400 W
Sensitivity398,0 dB
Frequency Range28 - 2500 Hz
Voice Coil Diameter100 mm
Winding Materialcopper
Surround ShapeTriple roll
Cone ShapeStraight
Magnet MaterialFerrite
Woofer Cone TreatmentWeather protected
Recommended Enclosure220,0 dm3
Recommended Tuning33 Hz
Resonance Frequency31 Hz
Re5,0 Ohm
Qes0,31
Qms7,2
Qts0,29
Vas297,0 dm3
Sd1225,0 cm2
Xmax9,0 mm
Mms190,0 g
Bl24,7 Txm
Le2,3 mH
EBP100 Hz
Overall Diameter462 mm
Bolt Circle Diameter438 mm
Baffle Cutout Diameter416,0 mm
Depth215 mm
Flange and Gasket Thickness26 mm
Net Weight13,3 kg
Shipping Weight14,9 kg
Shipping Box482 x 482 x 257 mm
Shipping Weight
14,9 kg
Sd
1225,0 cm2
Qms
7,2
Winding Material
copper
Bl
24,7 Txm
Sensitivity3
98,0 dB
Magnet Material
Ferrit
Vas
297,0 dm3
Net Weight
13,3 kg
Recommended Tuning
33 Hz
Xmax
9,0 mm
Qes
0,31
Resonance Frequency
31 Hz
Baffle Cutout Diameter
416,0 mm
Re
5,0 Ohm
Nominal Power Handling1
1000 W
Voice Coil Diameter
100 mm
Mms
190,0 g
Woofer Cone Treatment
Weather protected
Le
2,3 mH
Frequency Range
28 - 2500 Hz
Shipping Box
482 x 482 x 257 mm
Nominal Impedance
8 Ohm
Depth
215 mm
Flange and Gasket Thickness
26 mm
Bolt Circle Diameter
438 mm
Continuous Power Handling2
1400 W
Surround Shape
Triple roll
Overall Diameter
462 mm
Minimum Impedance
6,4 Ohm
Nominal Diameter
460 mm
Qts
0,29
EBP
100 Hz
Cone Shape
Straight
Recommended Enclosure
220,0 dm3

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.