B&C Speakers 15DS100 - 15,0 Zoll Lautsprecher - 8 Ohm
BC15DS100
- 3000 W continuous program power capacity
- 100 mm (4 in) four layer aluminium voice coil
- 39 - 1000 Hz response
- 96.8 dB sensitivity
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
3000 WContinuous power handling. 4.0 in (100 mm)Voice coil diameter. Neodymium Inside SlugMagnet material. This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is less heat, more energy in the gap, higher sensitivity, higher power handling, lower distortion and better overall performance. The 15DS100 features a 37mm long, 4 inch diameter (100mm) Copper Clad Aluminum Wire voice coil. With a 1500watt AES power rating, 96.8 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range..
| Specifications | |
| Nominal Diameter | 380 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 6,2 Ohm |
| Nominal Power Handling1 | 1500 W |
| Continuous Power Handling2 | 3000 W |
| Sensitivity3 | 96,8 dB |
| Frequency Range | 39 - 1000 Hz |
| Voice Coil Diameter | 100 mm |
| Winding Material | Aluminium |
| Former Material | Glass Fibre |
| Winding Depth | 37,0 mm |
| Magnetic Gap Depth | 16,0 mm |
| Flux Density | 0,7 TDesign |
| Surround Shape | Triple Roll |
| Cone Shape | Radial |
| Magnet Material | Neodym |
| Spider | Double Silicone |
| Pole Design | T-Pole |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Recommended Enclosure | 120,0 dm3 |
| Recommended Tuning | 40 HzParameters4 |
| Resonance Frequency | 39 Hz |
| Re | 4,5 Ohm |
| Qes | 0,27 |
| Qms | 7,75 |
| Qts | 0,26 |
| Vas | 76,0 dm3 |
| Sd | 855,0 cm2 |
| No | 1,77 % |
| Xmax | ± 14,5 mm |
| Xvar | ± 14,0 mm |
| Mms | 220,0 g |
| Bl | 30,68 Txm |
| Le | 4,6 mH |
| EBP | 144 HzMounting and Shipping Info |
| Overall Diameter | 393 mm |
| Bolt Circle Diameter | 374 mm |
| Baffle Cutout Diameter | 353,0 mm |
| Depth | 190 mm |
| Flange and Gasket Thickness | 16 mm |
| Air Volume Occupied by Driver | 6,0 dm3 |
| Net Weight | 9,6 kg |
| Shipping Units | 1 |
| Shipping Weight | 10,9 kg |
| Shipping Box | 425x425x224 mm |
| Recone kit | RCK15DS1008Discover more2 hours tes |
- Magnet
- Neodymium Inside Slug
- EBP
- 144 Hz
- Netto Gewicht
- 9.6 kg
- BL
- 30.68 Txm
- Re
- 4.5 Ω
- Recone kit
- RCK15DS1008
- XVar
- ± 14.0 mm
- Shipping Units
- 1
- Spider
- Double Silicone
- Nominale Impedanz
- 8 Ω
- Mms
- 220.0 g
- Xmax
- 14.5 mm
- Qts
- 0.26
- Qes
- 0.27
- Winding Depth
- 37.0 mm (1.46 in)
- Flange and Gasket Thickness
- 16 mm (0.63 in)
- Tuning Frequenz
- 40 Hz
- Außendurchmesser
- 393 mm (15.47 in)
- Cone Shape
- Radial
- Pole Design
- T-Pole
- ?0
- 1.77 %
- Former Material
- Glass Fibre
- Nominale Belastbarkeit
- 1500 W
- Versandgewicht
- 10.9 kg (24.03 lb)
- Sd
- 855.0 cm2 (132.53 in2)
- Air Volume Occupied by Driver
- 6.0 dm3 (0.21 ft3)
- Lochkreisdurchmesser
- 374 mm (16.7 in)
- Wicklung besteht aus
- Aluminium
- Frequenzbereich
- 39 - 1000 Hz
- Surround Shape
- Triple Roll
- Empfindlichkeit
- 96.8 dB
- Flux Density
- 0.7 T
- Magnetic Gap Depth
- 16.0 mm (0.63 in)
- Vas
- 76.0
- Versandkarton
- 425x425x224 mm (16.73x16.73x8.82 in)
- Resonanz Frequenz
- 39 Hz
- Le
- 4.6 mH
- Recommended Enclosure
- 120.0 dm3 (4.24 ft3)
- MInimale Impedanz
- 6.2 Ω
- Qms
- 7.75
- Nominaler Durchmesser
- 380 mm (15.0 in)
- Einbautiefe
- 190 mm (7.5 in)
- Schallwandausschnitt
- 353.0 mm (13.9 in)
- Schwingspulendurchmesser
- 100 mm (4.0 in)
- Dauerbelastbarkeit
- 3000 W
- Woofer Cone Treatment
- TWP Waterproof Both Sides
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.