Eighteensound 15NW530 15inch Lautsprecher Chassis 8 Ohm
ES15NW530
- 96 dB SPL 1W / 1m average sensitivity
- 75 mm (3 in) edgewound copper voice coil
- 500 W AES power handling
- Double Silicon Spider (DSS) for improved excursion control and linearity
- Single Demodulating Ring (SDR) for lower distortion
- High excursion damped rubber roll surround
- Suitable for outdoor applications
- Ideal for compact subwoofer use
The 15NW530 low frequency neodymium transducer has been specifically developed for high power, low distortion, compact subwoofer applications. The transducer finds its main application on compact vented subwoofers as small as 75 lit. properly tuned, but it is suitable also in bandpass or horn loaded applications. The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The transducer incorporates Eighteen Sound exclusive DSS technology (Double Silicon Spider) in combination with a single roll highly damped rubber surround. The already low distortion and sound quality are further improved by properly positioned Single Demodulating Ring (SDR technology) that flatten impedance and phase with a constant power transfer. The 75mm edge-wound state-of-the-art voice coil assembly is wound on a strong fiberglas former to improve force transmission and power handling. The deep profile curvilinear cone, created from a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The in-house developed cone treatment is a humidity repellent and significantly dampens bell mode resonances. A special coating applied to both the top and back plates makes the 15NW530 far more resistant to the corrosive effects of salts and oxidization.
Nominal Diameter | 380 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance | 6,3 Ohm |
Nominal Power Handling1 | 500 W |
Continuous Power Handling2 | 800 W |
Sensitivity3 | 96,0 dB |
Frequency Range | 47 - 3500 Hz |
Voice Coil Diameter | 75 mm |
Winding Material | copper |
Surround Shape | Single roll - Rubber |
Cone Shape | Curvilinear |
Magnet Material | Neo |
Woofer Cone Treatment | Weather protected |
Recommended Enclosure | 100,0 dm3 |
Recommended Tuning | 43 Hz |
Resonance Frequency | 38 Hz |
Re | 5,3 Ohm |
Qes | 0,35 |
Qms | 5,81 |
Qts | 0,33 |
Vas | 154,0 dm3 |
Sd | 900,0 cm2 |
Xmax | 7,5 mm |
Mms | 135,0 g |
Bl | 22,0 Txm |
Le | 1,4 mH |
EBP | 108 Hz |
Overall Diameter | 387 mm |
Bolt Circle Diameter | 370 mm |
Baffle Cutout Diameter | 353,0 mm |
Depth | 169 mm |
Flange and Gasket Thickness | 11 mm |
Net Weight | 4,0 kg |
Shipping Weight | 4,8 kg |
Shipping Box | 405 x 405 x 214 mm |
- Mms
- 135.0 g
- Recommended Enclosure
- 100.0 dm3 (3.53 ft3)
- Netto Gewicht
- 4.4 kg
- Wicklung besteht aus
- copper
- Magnet
- Neo
- Sd
- 855.0 cm2 (132.53 in2)
- Qts
- 0.33
- Vas
- 154.0
- Flange and Gasket Thickness
- 11 mm (0.43 in)
- Xmax
- 7.5 mm
- Woofer Cone Treatment
- Weather protected
- Schallwandausschnitt
- 353.0 mm (13.9 in)
- Nominale Belastbarkeit
- 500 W
- Lochkreisdurchmesser
- 370 mm (14.57 in)
- Qes
- 0.35
- Nominaler Durchmesser
- 380 mm ( in)
- BL
- 22.0 Txm
- Tuning Frequenz
- 43 Hz
- EBP
- 108 Hz
- Resonanz Frequenz
- 38 Hz
- Nominale Impedanz
- 8 Ω
- Außendurchmesser
- 387 mm (15.24 in)
- Surround Shape
- Single roll - Rubber
- Frequenzbereich
- 47 - 3500 Hz
- Cone Shape
- Curvilinear
- Le
- 1.4 mH
- Versandgewicht
- 5.5 kg (12.13 lb)
- Versandkarton
- 405 x 405 x 214 mm (15.94x15.94x8.43 in)
- Re
- 5.3 Ω
- Qms
- 5.81
- Einbautiefe
- 169 mm (6.65 in)
- MInimale Impedanz
- 6.3 Ω
- Dauerbelastbarkeit
- 800 W
- Empfindlichkeit
- 96.0 dB
- Schwingspulendurchmesser
- 75 mm (3.0 in)
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.