Eighteensound 12ND930 12inch Lautsprecher Chassis 8 Ohm

Artikelnummer: ES12ND930

LF Neodymium Transducer

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Wednesday, 06.11 und Friday, 08.11 nach Deutschland

Mengenstaffelpreise
Von 2 Stück 313,70 €
Von 4 Stück 304,10 €
Von 8 Stück 300,89 €
Von 14 Stück 294,49 €
? Warenkorb in PayPal anzeigen

Eighteensound 12ND930 12inch Lautsprecher Chassis 8 Ohm


ES12ND930

  • 98 dB SPL 1W / 1m average sensitivity
  • 75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
  • 500 W AES power handling
  • External neodymium magnet assembly
  • Double Demodulating Rings (DDR) for lower distortion
  • Humidity resistant cone
  • Ideal for 2 way systems and compact high loading subwoofer applications

The 12ND930 is a high power, high output, low frequency woofer meeting the most stringent requirements in high quality professional transducers. The high level of performance and sound quality have been achieved by exploiting the most advanced technologies available today. Thanks to its versatility, the 12ND930 can be used in two-way compact reflex enclosures with a 1.4" compression driver, in multi-way systems and in high loading sub woofers as small as 50 lt (compact reflex, band-pass and hornloaded configurations). The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The direct contact between the large heat sink and the basket, together with the magnetic structure, represents a fundamental improvement in thermal connection and heat dissipation. The result is increased power handling capabilities and lower power compression. The curvilinear cone profile, created with a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround in linen material is highly resistant to aging and fatigue. The in-house developed cone treatment is a humidity repellent and significant dampens bell mode resonance. The 12ND930 employs our Interleaved Sandwich Voice coil (ISV) in which a high strength fiberfiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The already low distortion and sound quality are further improved by Double Demodulating Rings (DDR), that flatten impedance and phase figures with a constant power transfer. A special coating applied to both the top and back plates makes the 12ND930 far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter300 mm
Nominal Impedance8 Ohm
Minimum Impedance6,4 Ohm
Nominal Power Handling1500 W
Continuous Power Handling2800 W
Sensitivity398,0 dB
Frequency Range46 - 4500 Hz
Voice Coil Diameter75 mm
Winding Materialcopper
Surround ShapeM-roll
Cone ShapeCurvilinear
Magnet MaterialNeo
Recommended Enclosure70,0 dm3
Recommended Tuning52 Hz
Resonance Frequency50 Hz
Re5,5 Ohm
Qes0,22
Qms5,64
Qts0,21
Vas70,0 dm3
Sd531,0 cm2
Xmax6,5 mm
Mms57,0 g
Bl21,2 Txm
Le1,65 mH
EBP227 Hz
Overall Diameter315 mm
Bolt Circle Diameter296 mm
Baffle Cutout Diameter282,0 mm
Depth140 mm
Flange and Gasket Thickness11 mm
Net Weight4,0 kg
Shipping Weight5,1 kg
Shipping Box332 x 332 x 184 mm
Le
1.65 mH
MInimale Impedanz
6.4 Ω
Versandkarton
332 x 332 x 184 mm (13.07x13.07x7.24 in)
Magnet
Neo
BL
21.2 Txm
Versandgewicht
5.1 kg ( lb)
Frequenzbereich
46 - 4500 Hz
Einbautiefe
140 mm (5.51 in)
Schwingspulendurchmesser
75 mm (3.0 in)
Mms
57.0 g
Dauerbelastbarkeit
800 W
Vas
70.0
Außendurchmesser
315 mm (12.4 in)
Schallwandausschnitt
282.0 mm (11.1 in)
Xmax
6.5 mm
Surround Shape
M-roll
Nominaler Durchmesser
300 mm ( in)
Wicklung besteht aus
copper
Nominale Belastbarkeit
500 W
Recommended Enclosure
70.0 dm3 (2.47 ft3)
Re
5.5 Ω
Qms
5.64
Lochkreisdurchmesser
296 mm (11.65 in)
Netto Gewicht
4.4 kg
Nominale Impedanz
8 Ω
Empfindlichkeit
98.0 dB
Sd
531.0 cm2 (82.31 in2)
Cone Shape
Curvilinear
Flange and Gasket Thickness
11 mm (0.43 in)
Qts
0.21
Qes
0.22
EBP
227 Hz
Resonanz Frequenz
50 Hz
Tuning Frequenz
52 Hz

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.