B&C Speakers 15DS115 - 15,0 Zoll Lautsprecher - 8 Ohm
BC15DS115
- 3200 W continuous program power capacity
- 116 mm (4.5 in) four layer aluminum voice coil
- 35 - 1000 Hz response
- 97 dB sensitivity
- 60 mm peak-to-peak excursion before damage
- Neodymium magnet allows a very high force factor and linear excursion
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
3200 WContinuous power handling. 4.5 in (116 mm)Voice coil diameter. Neodymium Inside SlugMagnet material. This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 15DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1600watt AES power rating, 97 dB sensitivity, and over 14 mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range..
Specifications | |
Nominal Diameter | 380 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance | 7,2 Ohm |
Nominal Power Handling1 | 1600 W |
Continuous Power Handling2 | 3200 W |
Sensitivity3 | 97,0 dB |
Frequency Range | 35 - 1000 Hz |
Voice Coil Diameter | 116 mm |
Winding Material | Aluminium |
Former Material | Glass Fibre |
Winding Depth | 40,0 mm |
Magnetic Gap Depth | 14,0 mm |
Flux Density | 0,8 TDesign |
Surround Shape | Triple Roll |
Cone Shape | Radial |
Magnet Material | Neodym |
Spider | Double Silicone |
Pole Design | T-Pole |
Woofer Cone Treatment | TWP Waterproof Both Sides |
Recommended Enclosure | 80,0 dm3 |
Recommended Tuning | 40 HzParameters4 |
Resonance Frequency | 33 Hz |
Re | 4,9 Ohm |
Qes | 0,18 |
Qms | 5,2 |
Qts | 0,17 |
Vas | 94,0 dm3 |
Sd | 855,0 cm2 |
No | 1,9 % |
Xmax | ± 16,5 mm |
Xvar | ± 14,0 mm |
Mms | 254,0 g |
Bl | 38,7 Txm |
Le | 4,5 mH |
EBP | 183 HzMounting and Shipping Info |
Overall Diameter | 393 mm |
Bolt Circle Diameter | 375 mm |
Baffle Cutout Diameter | 354,0 mm |
Depth | 199 mm |
Flange and Gasket Thickness | 15 mm |
Air Volume Occupied by Driver | 7,0 dm3 |
Net Weight | 11,6 kg |
Shipping Units | 1 |
Shipping Weight | 12,9 kg |
Shipping Box | 425x425x224 mm |
Recone kit | RCK15DS1158Discover more2 hours tes |
- EBP
- 183 Hz
- ?0
- 1.9 %
- Empfindlichkeit
- 97.0 dB
- Re
- 4.9 Ω
- Lochkreisdurchmesser
- 375 mm (14.76 in)
- Vas
- 94.0
- Wicklung besteht aus
- Aluminium
- Flange and Gasket Thickness
- 15 mm (0.59 in)
- Qms
- 5.2
- Recommended Enclosure
- 80.0 dm3 (2.83 ft3)
- Magnet
- Neodymium Inside Slug
- Versandkarton
- 425x425x224 mm (16.73x16.73x8.82 in)
- Nominale Impedanz
- 8 Ω
- Frequenzbereich
- 35 - 1000 Hz
- Winding Depth
- 40.0 mm (1.57 in)
- Außendurchmesser
- 393 mm (15.47 in)
- Resonanz Frequenz
- 33 Hz
- Xmax
- 16.5 mm
- Dauerbelastbarkeit
- 3200 W
- Pole Design
- T-Pole
- MInimale Impedanz
- 7.2 Ω
- Nominaler Durchmesser
- 380 mm (15.0 in)
- Shipping Units
- 1
- Mms
- 254.0 g
- Netto Gewicht
- 11.6 kg
- Surround Shape
- Triple Roll
- Schallwandausschnitt
- 354.0 mm (13.94 in)
- Air Volume Occupied by Driver
- 7.0 dm3 (0.25 ft3)
- Nominale Belastbarkeit
- 1600 W
- XVar
- ± 14.0 mm
- Qes
- 0.18
- Tuning Frequenz
- 40 Hz
- Versandgewicht
- 12.9 kg (28.44 lb)
- Spider
- Double Silicone
- Schwingspulendurchmesser
- 116 mm (4.5 in)
- Sd
- 855.0 cm2 (132.53 in2)
- Qts
- 0.17
- Woofer Cone Treatment
- TWP Waterproof Both Sides
- Cone Shape
- Radial
- Magnetic Gap Depth
- 14.0 mm (0.55 in)
- Flux Density
- 0.8 T
- Recone kit
- RCK15DS1158
- Former Material
- Glass Fibre
- BL
- 38.7 Txm
- Einbautiefe
- 199 mm (7.83 in)
- Le
- 4.5 mH
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.