B&C Speakers 8MBX51 - 8,0 Zoll Lautsprecher - 8 Ohm
BC8MBX51
- 400 W continuous program power capacity
- 51 mm (2 in) aluminium voice coil
- 60 - 4000 Hz response
- 96.5 dB sensitivity
- Neodymium ring magnet assembly
- Aluminium ring allows a very low distortion figure
- Ventilated voice coil gap for reduced power compression
400 WContinuous power handling. 2.0 in (51 mm)Voice coil diameter. Neodymium RingMagnet material. The MBX series mid-bass woofers from B&C Speakers offer acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures..
| Specifications | |
| Nominal Diameter | 200 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 5,9 Ohm |
| Nominal Power Handling1 | 200 W |
| Continuous Power Handling2 | 400 W |
| Sensitivity3 | 96,5 dB |
| Frequency Range | 60 - 4000 Hz |
| Voice Coil Diameter | 51 mm |
| Winding Material | Aluminium |
| Former Material | Glass Fibre |
| Winding Depth | 15,0 mm |
| Magnetic Gap Depth | 7,0 mm |
| Flux Density | 1,3 TDesign |
| Surround Shape | Triple Roll |
| Cone Shape | Curvilinear |
| Magnet Material | Neodym |
| Spider | Single |
| Pole Design | T-Pole |
| Woofer Cone Treatment | Waterproof Impregnated Cone |
| Recommended Enclosure | 19,0 dm3 |
| Recommended Tuning | 63 HzParameters4 |
| Resonance Frequency | 60 Hz |
| Re | 4,9 Ohm |
| Qes | 0,31 |
| Qms | 5,6 |
| Qts | 0,29 |
| Vas | 23,0 dm3 |
| Sd | 220,0 cm2 |
| No | 1,7 % |
| Xmax | ± 6,0 mm |
| Xvar | ± 8,0 mm |
| Mms | 20,0 g |
| Bl | 11,4 Txm |
| Le | 0,4 mH |
| EBP | 193 HzMounting and Shipping Info |
| Overall Diameter | 225 mm |
| Bolt Circle Diameter | 210 mm |
| Baffle Cutout Diameter | 187,0 mm |
| Depth | 93 mm |
| Flange and Gasket Thickness | 9 mm |
| Air Volume Occupied by Driver | 1,1 dm3 |
| Net Weight | 1,8 kg |
| Shipping Units | 1 |
| Shipping Weight | 2,25 kg |
| Shipping Box | 255x255x150 mm |
| Recone kit | RCK008MBX518Discover more2 hours te |
- Woofer Cone Treatment
- Waterproof Impregnated Cone
- Shipping Units
- 1
- Qms
- 5.6
- Air Volume Occupied by Driver
- 1.1 dm3 (0.04 ft3)
- Lochkreisdurchmesser
- 210 mm (8.27 in)
- Mms
- 20.0 g
- Recommended Enclosure
- 19.0 dm3 (0.67 ft3)
- Nominale Impedanz
- 8 Ω
- Wicklung besteht aus
- Aluminium
- Empfindlichkeit
- 96.5 dB
- Schwingspulendurchmesser
- 51 mm (2.0 in)
- Cone Shape
- Curvilinear
- Außendurchmesser
- 225 mm (8.86 in)
- Versandgewicht
- 2.25 kg (4.96 lb)
- XVar
- ± 8.0 mm
- Frequenzbereich
- 60 - 4000 Hz
- Surround Shape
- Triple Roll
- Qes
- 0.31
- Former Material
- Glass Fibre
- Schallwandausschnitt
- 187.0 mm (7.36 in)
- Re
- 4.9 Ω
- Flux Density
- 1.3 T
- Resonanz Frequenz
- 60 Hz
- Spider
- Single
- Magnet
- Neodymium Ring
- Flange and Gasket Thickness
- 9 mm (0.35 in)
- Dauerbelastbarkeit
- 400 W
- Nominale Belastbarkeit
- 200 W
- Pole Design
- T-Pole
- ?0
- 1.7 %
- Netto Gewicht
- 1.8 kg
- Vas
- 23.0
- BL
- 11.4 Txm
- Xmax
- 6.0 mm
- Magnetic Gap Depth
- 7.0 mm (0.28 in)
- Nominaler Durchmesser
- 200 mm (8.0 in)
- Einbautiefe
- 93 mm (3.66 in)
- Qts
- 0.29
- Le
- 0.4 mH
- Sd
- 220.0 cm2 (34.1 in2)
- EBP
- 193 Hz
- Tuning Frequenz
- 63 Hz
- Versandkarton
- 255x255x150 mm (10.04x10.04x5.91 in)
- Recone kit
- RCK008MBX518
- Winding Depth
- 15.0 mm (0.59 in)
- MInimale Impedanz
- 5.9 Ω
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.