Eighteensound 8CX401F 8inch Coaxial Lautsprecher 8 Ohm

Artikelnummer: ES8CX401F

High Output Coaxial Ferrite Transducer

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Saturday, 30.03 und Monday, 01.04 nach Deutschland

Mengenstaffelpreise
Von 2 Stück 243,82 €
Von 4 Stück 236,36 €
Von 8 Stück 233,87 €
Von 14 Stück 228,90 €
? Warenkorb in PayPal anzeigen

Eighteensound 8CX401F 8inch Coaxial Lautsprecher 8 Ohm


ES8CX401F

  • 95dB SPL 1W / 1m average sensitivity
  • 280W LF - 50W HF power handling
  • 51mm (2 inches) LF Interleaved Sandwich Voice coil (ISV)
  • 25,4mm (1 inch) HF driver edgewound voice coil
  • 90 degrees coverage pattern
  • Ideal for compact reflex applications

The 8CX401F coaxial transducer is a 8 inch - 1 inch coaxial driver combining excellent linearity with good efficiency and power handling capabilities.It is primarily intended for compact reflex enclosures and, because of its versatile characteristics, may also be used in multiway systems or ceiling applications. Its nominal dispersion is 90 degrees.The curvilinear, paper LF section cone is formed using a unique wood pulp composition designed to achieve the best possible rigidity and stiffness. A polycotton multiroll surround to provide increased excursion whilst controlling break up modes carries it.The 51mm Ø state-of-the-art, aluminum wire voice coil employees same technology of that fitted to our top-of-the-range models using our Interleaved Sandwich Voice coil (ISV) technology. In essence, a high strength Fiberglas former is used to carry windings on both the outer and inner surfaces to achieve a mass balanced coil. Thisresults in an extremely linear motor assembly, which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL.The high frequency driver incorporates a polyester material diaphragm for best movement and stress control; the special radialribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound copper clad aluminum voice coil wounded on treated Nomex completes the diaphragm assembly.A computer aided FEA has been used in order to maximize the cone profile coupling and to control the energy in the desired frequency range.A dedicated high quality passive crossover network is available upon request.With the increasing use of outdoor audio events, the ability to perform in humid environments is another feature of the 8CX400F. This is achieved by means of exclusively developed humidity repellent cone treatment.

Nominal Diameter200 mm
Nominal Impedance8 Ohm
Minimum Impedance LF6,1 Ohm
Frequency Range65 - 6100 Hz
Dispersion Angle190 °
Woofer Cone TreatmentHumidity repellent
Magnet MaterialFerrite
LF Sensitivity295,0 dB
LF Nominal Power Handling3280 W
LF Continuous Power Handling4400 W
LF Voice Coil Diameter51 mm
LF Winding MaterialISV Aluminum
Former MaterialFiberglas
HF Sensitivity5105,0 dB
HF Nominal Power Handling625 W
HF Continuous Power Handling750 W
HF Voice Coil Diameter25 mm
HF Winding MaterialEdge wound Aluminum
Diaphragm MaterialPolyester
Recommended Crossover83,0 kHz
Resonance Frequency56 Hz
Re5,0 Ohm
Qes0,38
Qms3,23
Qts0,34
Vas23,9 dm3
Sd227,0 cm2
Xmax5,8 mm
Mms18,0 g
Bl9,3 Txm
Le0,96 mH
EBP147 Hz
Overall Diameter210 mm
Bolt Circle Diameter195 mm
Baffle Cutout Diameter186 mm
Depth150 mm
Flange and Gasket Thickness14 mm
Net Weight4,4 kg
Shipping Weight5,0 kg
Shipping Box235x235x165 mm
Model03708XCR00
Nominal Impedance8,0 Ohm
Low-pass Slope12,0 dB/oct
High-pass Slope12,0 dB/octIncluded by –6 dB down points,Applied RMS Voltage is set to 2,83V,2 hours test made with continuous pink noise signal within the range Fs-10Fs, Power calculated on rated minimum impedance, Loudspeaker in free air,Power on Continuous Program is defined as 3 dB greater than the Nominal rating,Applied RMS Voltage is set to 2,83V,2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz, Power calculated on rated nominal impedance, Loudspeaker in free air,Power on Continuous Program is defined as 3 dB greater than the Nominal rating,12 dB/oct, or higher slope high-pass filter,
LF Voice Coil Diameter
51 mm (2.0 in)
HF Continuous Power Handling
50 W
BL
9.3 Txm
MInimale Impedanz Tiefton
6.1 Ω
LF Sensitivity
95.0 dB
Nominale Impedanz
8 Ω
EBP
147 Hz
Einbautiefe
150 mm (5.91 in)
Versandkarton
235x235x165 mm (9.25x9.25x6.50 in)
Vas
23.9
Außendurchmesser
210 mm (8.27 in)
High-pass Slope
12.0 dB/oct
HF Winding Material
Edge wound Aluminum
LF Continuous Power Handling
400 W
Nominaler Durchmesser
200 mm (7.87 in)
Qts
0.34
HF Voice Coil Diameter
25 mm (1.0 in)
Former Material
Fiberglas
Schallwandausschnitt
186 mm (7.32 in)
Lochkreisdurchmesser
195 mm (7.68 in)
Resonanz Frequenz
56 Hz
Qms
3.23
Model
03708XCR00
Magnet
Ferrite
Recommended Crossover
3.0 kHz
Versandgewicht
5.0 kg (11.02 lb)
Diaphragm Material
Polyester
Netto Gewicht
4.4 kg
Re
5.0 Ω
Le
0.96 mH
Low-pass Slope
12.0 dB/oct
Flange and Gasket Thickness
14 mm (0.55 in)
LF Nominal Power Handling
280 W
Woofer Cone Treatment
Humidity repellent
Qes
0.38
Mms
18.0 g
LF Winding Material
ISV Aluminum
HF Nominal Power Handling
25 W
Xmax
5.8 mm
Frequenzbereich
65 - 6100 Hz
HF Sensitivity
105.0 dB
Sd
227.0 cm2 (35.19 in2)
Dispersion Angle
90 °

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.