Eighteensound 12ND930 LF Neodymium Transducer Lautsprecher

Artikelnummer: ES12ND930

LF Neodymium Transducer

Mengenstaffelpreise
Von 2 Stück 255,92 €
Von 4 Stück 253,33 €
Von 8 Stück 250,74 €
Von 12 Stück 248,16 €
Sofort lieferbar Lieferzeit: 4 - 6 Tage
  • 98 dB SPL 1W / 1m average sensitivity
  • 75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
  • 500 W AES power handling
  • External neodymium magnet assembly
  • Double Demodulating Rings (DDR) for lower distortion
  • Humidity resistant cone
  • Ideal for 2 way systems and compact high loading subwoofer applications

The 12ND930 is a high power, high output, low frequency woofer meeting the most stringent requirements in high quality professional transducers. The high level of performance and sound quality have been achieved by exploiting the most advanced technologies available today. Thanks to its versatility, the 12ND930 can be used in two-way compact reflex enclosures with a 1.4" compression driver, in multi-way systems and in high loading sub woofers as small as 50 lt (compact reflex, band-pass and hornloaded configurations). The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The direct contact between the large heat sink and the basket, together with the magnetic structure, represents a fundamental improvement in thermal connection and heat dissipation. The result is increased power handling capabilities and lower power compression. The curvilinear cone profile, created with a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround in linen material is highly resistant to aging and fatigue. The in-house developed cone treatment is a humidity repellent and significant dampens bell mode resonance. The 12ND930 employs our Interleaved Sandwich Voice coil (ISV) in which a high strength fiberfiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The already low distortion and sound quality are further improved by Double Demodulating Rings (DDR), that flatten impedance and phase figures with a constant power transfer. A special coating applied to both the top and back plates makes the 12ND930 far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter 300mm (12 in)
Rated Impedance 8 Ohm
AES Power 500W
Program Power 800W
Peak Power 1600W
Sensitivity 98dB
Frequency Range 46 ÷ 4500 Hz
Power Compression @-10dB 0,9 dB
Power Compression @-3dB 2,2 dB
Power Compression @Full Power 3,1 dB
Max Recomm. Frequency 2000 Hz
Recomm. Enclosure Volume 30 ÷ 100 lt. (1,06 ÷ 3,53 cuft)
Minimum Impedance 6,4 Ohm at 25°C
Max Peak To Peak Excursion 30 mm (1,18 in)
Voice Coil Diameter 75 mm (3 in)
Voice Coil Winding Material copper
Suspension M-roll, Polycotton
Cone Curvilinear, Treated Paper
Thiele Small Parameters
Fs 50 Hz
Re 5,5 Ohm
Sd 0,0531 sq.mt. (82,31 sq.in.)
Qms 5,64
Qes 0,218
Qts 0,21
Vas 70 lt. (2,47cuft)
Mms 57 gr. (0,13 lb)
BL 21,2 Tm
Linear Mathematical Xmax ± 6,5 mm (± 0,26 in)
Le (1kHz) 1,65 mH
Ref. Efficiency 1W@1m (half space) 98 dB
Mounting information
Overall diameter 315 mm (12,4 in)
N. of mounting holes and bolt 8
Mounting holes diameter 7,15 mm (0,28 in)
Bolt circle diameter 296-300 mm (11,65-11,8 in)
Front mount baffle cutout ø 282 mm (11,1 in)
Rear mount baffle cutout ø 282 mm (11,1 in)
Total depth 140 mm (5,52 in)
Flange and gasket thickness 11,5 mm (0,45 in)
Net weight 4 kg (8,83 lb)
Shipping weight 5,1 kg (11,24 lb)
CardBoard Packaging dimensions 332 x 332 x 184 mm(13,07 x 13,07 x 7,24 in)

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.