Eighteensound 12ND710 Very High Output MB Neodymium Treiber Lautsprecher

Artikelnummer: ES12ND710

Very High Output MB Neodymium Driver

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Saturday, 30.03 und Monday, 01.04 nach Deutschland

Mengenstaffelpreise
Von 2 Stück 307,92 €
Von 4 Stück 298,49 €
Von 8 Stück 295,35 €
Von 14 Stück 289,06 €
? Warenkorb in PayPal anzeigen
101 dB SPL 1W / 1m average sensitivity75 mm (3 in) Interleaved Sandwich Voice coil (ISV)450 W AES power handlingNeodymium magnet assemblyDouble Demodulating Rings (DDR) for lower distortion and reduced inductanceHumidity resistant coneSuitable for midbass frequency reproduction
The 12ND710 has been specifically designed for use either as a midbass driver in compact 2-way reflex enclosures or as a direct radiating or horn loaded, dedicated midrange driver, in multi-way touring and fixed installation concert and arena systems.The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange because the external magnet configuration is considerably more efficient than traditional under-pole magnet topology.Consequently, high levels of force factor and power handling with an optimum power to weight ratio have been achieved.Direct coupling of the special design basket and magnetic assembly with the large heat sink facilitates thermal flux through the ambient air, increasing the power handling capabilities and lowering the power compression.The curvilinear paper cone has been created with a special high strength wood pulp designed to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by a multiroll suspension formed from a linen-like material which is more resistant to aging and fatigue than traditional materials.The already low distortion and sound quality are further improved by the use of Double Demodulating Rings technology (DDR) designed to dramatically reduce the intermodulation and harmonic distortion and improve the transient response.The 12ND710 implements Interleaved Sandwich Voice coil technology (ISV), in which an aluminum coil is wound inside and outside a high strength fiberglas former, providing a better thermal and mechanical performance than conventional coils.A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12ND710 far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter 300 mm (12 in)
Rated Impedance 8 Ohm
AES Power 450W
Program Power 700W
Peak Power 1400W
Sensitivity 101 dB
Frequency Range 60 ÷ 6000Hz
Power Compression @-10dB 0,6 dB
Power Compression @-3dB 2 dB
Power Compression @Full Power 2,8 dB
Max Recomm. Frequency 2000 Hz
Recomm. Enclosure Volume 10 ÷ 80 lt. (0,35÷ 1.41 cuft)
Max Peak To Peak Excursion 22 mm (0,9 in)
Voice Coil Diameter 75 mm (3 in)
Voice Coil Winding Material aluminum
Suspension M-roll, Polycotton
Cone Curvilinear, Paper
Thiele Small Parameters
Fs 52 Hz
Re 5 Ohm
Sd 0,053 sq.mt. (82,2 sq.in.)
Qms 6
Qes 0,2
Qts 0,2
Vas 92 lt. (3,2 cuft)
Mms 40 gr. (88,3 lb)
BL 18 Tm
Linear Mathematical Xmax ± 5 mm (± 0,20 in)
Le (1kHz) 1 mH
Ref. Efficiency 1W@1m (half space) 100 dB
Mounting information
Overall diameter 315 mm (12,4 in)
N. of mounting holes and bolt 8
Mounting holes diameter 7,15 mm (0,3 in)
Bolt circle diameter 296-300 mm (11,65-11,8 in)
Front mount baffle cutout ø 282 mm (11,1 in)
Rear mount baffle cutout ø 282 mm (11,1 in)
Total depth 141mm (5,6 in)
Flange and gasket thickness 11,5 mm (0,5 in)
Flange and gasket thickness 11,5 mm (0,5 in)
Net weight 4,7 kg (9,1 lb)
Shipping weight 5.1 kg (11.24 lb)
CardBoard Packaging dimensions 332 x 332 x 184 mm(13,07 x 13,07 x 7,24 in)
Nominale Impedanz
8 Ω
Surround Shape
M-roll
Le
1.0 mH
Resonanz Frequenz
52 Hz
Schwingspulendurchmesser
75 mm (3.0 in)
EBP
260 Hz
Qts
0.2
BL
18.0 Txm
Netto Gewicht
4.4 kg
Nominale Belastbarkeit
450 W
Wicklung besteht aus
aluminum
Xmax
5.0 mm
Außendurchmesser
315 mm (12.4 in)
Recommended Enclosure
40.0 dm3 (1.41 ft3)
Lochkreisdurchmesser
296 mm (11.65 in)
Dauerbelastbarkeit
700 W
Frequenzbereich
60 - 6000 Hz
Mms
40.0 g
MInimale Impedanz
6.0 Ω
Sd
530.0 cm2 (82.15 in2)
Flange and Gasket Thickness
11 mm (0.43 in)
Qms
6.0
Versandkarton
332 x 332 x 184 mm (13.07x13.07x7.24 in)
Versandgewicht
5.1 kg ( lb)
Vas
92.0
Qes
0.2
Magnet
Neo
Re
5.0 Ω
Nominaler Durchmesser
300 mm ( in)
Einbautiefe
141 mm (5.55 in)
Schallwandausschnitt
282.0 mm (11.1 in)
Cone Shape
Curvilinear
Tuning Frequenz
58 Hz
Empfindlichkeit
101.0 dB

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.