Eighteensound 15NCX1000 15inch Coaxial Lautsprecher 8 Ohm
ES15NCX1000
- 96dB LF -108dB HF SPL 2.83v average sensitivity
- Dual neodymium magnet single motor
- 1200W LF - 260W HF maximum program power handling
- Smooth on/off axis 90° response
- 100 mm (4”) Interleaved Sandwich LF Voice coil (ISV)
- Aluminum Demodulating Ring (SDR) for minimum LF distortion
- 100 mm (4”) Edge-wound Aluminum ribbon HF voice coil (EWAL)
- HF pure titanium diaphragm
- HF copper sleeve for reduced distortion and higher output
- Smooth on/off axis 90° response
- Suitable for compact enclosures and stage monitors
The 15NCX1000 is a 15" diameter neodymium coaxial transducer designed for use in compact reflex enclosures and stage monitors. The LF cone provides smooth response within its intended frequency range thanks to its high damping pulp composition. Equipped with proprietary phase plug, the integrated 100mm (4") HF compression driver has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug assures low distortion with remarkable improvements in mid-high frequency reproduction. A copper ring on the pole piece reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation.The 4" diameter HF diaphragm assembly uses a high strength, high temperature treated Nomex voice coil former joined directly to the titanium diaphragm on its upper bend edge, assuring extended frequency energy transfer. This improves linearity and shows unparalleled reliability when compared with a straight former joint.A specific HF exit profile design has been chosen in order to maximize the cone’s profile coupling.The unique dual magnet single motor features high grade neodymium that makes the 15NCX1000 a lightweight speaker for its performance class.
| Nominal Diameter | 380 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance LF | 6,1 Ohm |
| Frequency Range | 44 - 3600 Hz |
| Dispersion Angle1 | 90 ° |
| Woofer Cone Treatment | Water repellent |
| LF Sensitivity2 | 96,0 dB |
| LF Nominal Power Handling3 | 600 W |
| LF Continuous Power Handling4 | 1200 W |
| LF Voice Coil Diameter | 100 mm |
| LF Winding Material | CCAW Aluminum |
| HF Sensitivity5 | 108,0 dB |
| HF Nominal Power Handling6 | 130 W |
| HF Continuous Power Handling7 | 260 W |
| HF Voice Coil Diameter | 100 mm |
| HF Winding Material | Edge wound CCAW |
| Diaphragm Material | Titanium |
| Recommended Crossover8 | 1,0 kHz |
| Resonance Frequency | 53 Hz |
| Re | 6,3 Ohm |
| Qes | 0,32 |
| Qms | 10,4 |
| Qts | 0,31 |
| Vas | 75,0 dm3 |
| Sd | 881,0 cm2 |
| No | 4,2 % |
| Xmax | 7,5 mm |
| Mms | 110,0 g |
| Bl | 27,5 Txm |
| Le | 1,4 mH |
| EBP | 165 Hz |
| Overall Diameter | 393 mm |
| Bolt Circle Diameter | 371 mm |
| Baffle Cutout Diameter | 354 mm |
| Depth | 197 mm |
| Flange and Gasket Thickness | 12 mm |
| Net Weight | 7,0 kg |
| Shipping Weight | 7,9 kg |
| Shipping Box | 405 x 405 x 260 mm |
- Lochkreisdurchmesser
- 371 mm (14.61 in)
- Re
- 6.3 Ω
- EBP
- 165 Hz
- Qms
- 10.4
- Recommended Crossover
- 1.0 kHz
- Xmax
- 7.5 mm
- HF Voice Coil Diameter
- 100 mm (3.94 in)
- HF Winding Material
- Edge wound CCAW
- Diaphragm Material
- Titanium
- MInimale Impedanz Tiefton
- 6.1 Ω
- Woofer Cone Treatment
- Water repellent
- Le
- 1.4 mH
- Vas
- 75.0
- Frequenzbereich
- 44 - 3600 Hz
- Nominale Impedanz
- 8 Ω
- Sd
- 881.0 cm2 (136.56 in2)
- Qes
- 0.32
- Mms
- 110.0 g
- ?0
- 4.2 %
- Versandkarton
- 405 x 405 x 260 mm (15.94x15.94x10.24 in)
- Flange and Gasket Thickness
- 12 mm (0.47 in)
- Versandgewicht
- 9.6 kg (21.16 lb)
- Nominaler Durchmesser
- 380 mm (14.96 in)
- LF Voice Coil Diameter
- 100 mm (3.94 in)
- Netto Gewicht
- 8.5 kg
- Außendurchmesser
- 393 mm (15.47 in)
- HF Continuous Power Handling
- 260 W
- LF Continuous Power Handling
- 1200 W
- LF Sensitivity
- 96.0 dB
- HF Sensitivity
- 108.0 dB
- LF Winding Material
- CCAW Aluminum
- LF Nominal Power Handling
- 600 W
- BL
- 27.5 Txm
- Schallwandausschnitt
- 354 mm (13.94 in)
- HF Nominal Power Handling
- 130 W
- Qts
- 0.31
- Dispersion Angle
- 90 °
- Einbautiefe
- 197 mm (7.76 in)
- Resonanz Frequenz
- 53 Hz
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.