Eighteensound 18NLW9601 Extended LF Neodymium Treiber Lautsprecher

Artikelnummer: ES18NLW9601

Extended LF Neodymium Driver

Sie sparen: 14%
689,00 €
Von 2 Stück 583,00 €
Von 4 Stück 577,10 €
Von 8 Stück 571,10 €
Von 16 Stück 565,20 €
Sofort lieferbar Lieferzeit: 2 - 4 Tage
  • 96 dB SPL 1W / 1m average sensitivity
  • 135 mm (5.3 in) split winding four layers ISV aluminum voice coil
  • 3600 W program power handling
  • Carbon fiber reinforced cellulose cone
  • Double Silicon Spider (DSS) for improved excursion control
  • Aluminum demodulating ring (SDR) for lower distortion
  • High force neodymium magnet assembly
  • Weather protected cone and plates for outdoor usage
  • Suitable for reflex, bandpass or horn loaded high SPL subwoofer systems

The 18NLW9601 is an extended low frequency 18 inch neodymium high performance transducer. It is the evolution of the industry standard 18NLW9600. The loudspeaker has been designed for use as a subwoofer component, in either a reflex, bandpass or horn loaded high SPL demanding applications. For optimum results recommended amplifier should be able to deliver 3600 Watt program power. At the heart of teh transducer stands a double silicon spider based on DSS technology let the 18NLW9601 being able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. The state-of-the-art 5,3" diameter ISV copper clad aluminum wire CCAW voice coil shows a inside-outside split winding, four layers design, enabling the 18NLW9601 to handle up to 3600W program power. Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes the 18NLW9601 an extremely low distortion, highly dynamic transducer. The already low distortion and sound quality have been further improved by the aluminum demodulating ring (SDR technology), that flatten impedance and phase versus frequency. The 18NLW9601 has been developed after intense FEA and fluidodynamics simulation and testing, focusing on dissipating the heat generated by the powerful voice coil. Special attention was given to the optimization of air flow into the gap without introducing audible noise. A low-density foam diffractor placed into the vent hole acts as a cooling system, increasing the power handling capability and lowering the power compression figure. The carbon fiber reinforced, straight ribbed cone shows a proprietary resin treatment for extra pulp strength and water repellent properties. A special coating applied to both the top and back plates makes the transducer far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter 462mm (18 in)
Rated Impedance 8 Ohm
AES Power 1800W
Program Power 3600W
Peak Power 10000W
Sensitivity 96 dB
Frequency Range 30 - 2300 Hz
Power Compression @-10dB 0,7 dB
Power Compression @-3dB 1,3 dB
Power Compression @Full Power 2,2 dB
Max Recomm. Frequency 150 Hz
Recomm. Enclosure Volume 110 ÷ 350 lt. (3,89 ÷ 12,36 cuft)
Minimum Impedance 6,1 Ohm at 25°C
Max Peak To Peak Excursion 70 mm (2,75 in)
Voice Coil Diameter 135 mm (5,3 in)
Voice Coil Winding material
Suspension Triple Roll, Heavy Polycotton
Cone Straight ribbed carbon fiber loaded cellulose
Thiele Small Parameters
Fs 39 Hz
Re 4,7 Ohm
Sd 0,113 sq.mt. (175.15 sq.in.)
Qms 5,70
Qes 0,30
Qts 0,28
Vas 120 lt. (5,79 cuft)
Mms 255 gr. (0,6 lb)
BL 31 Tm
Linear Mathematical Xmax ±14 mm (±0,55 in)
Le (1kHz) 2,19 mH
Ref. Efficiency 1W@1m (half space) 95,6 dB
Mounting information
Overall diameter 462 mm (18,18 in)
N. of mounting holes and bolt 8
Mounting holes diameter 8,5 mm (0,33 in)
Bolt circle diameter 440mm (17,32 in)
Front mount baffle cutout ø 416 mm (16,38 in)
Rear mount baffle cutout ø 422 mm (16,61 in)
Total depth 236 mm (9,29 in)
Flange and gasket thickness 26 mm (1,02 in)
Net weight 12,8 kg (27,6 lb)
Shipping weight 14,3 kg (31,50 lb)
CardBoard packaging dimensions
482x482x257 mm (19x19x10,1 in)

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.