Eighteensound 18LW2400 18inch Lautsprecher Chassis 8 Ohm

Artikelnummer: ES18LW2400

Extended LF Ferrite Transducer

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Saturday, 09.12 und Monday, 11.12 nach Deutschland

Von 2 Stück 345,45 €
Von 4 Stück 334,88 €
Von 8 Stück 331,35 €
Von 14 Stück 324,30 €
? Warenkorb in PayPal anzeigen

Eighteensound 18LW2400 18inch Lautsprecher Chassis 8 Ohm


  • 98 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
  • 2400 W program power handling
  • Fiberglass reinforced cone
  • Double Silicon Spider (DSS) for superior excursion control and linearity
  • Double Demodulating Rings (DDR) for lower distortion
  • Improved heat dissipation via multi-cell air diffractor and multiple backplate vents
  • Weather protected cone and plates for outdoor usage
  • Ideal for high SPL subwoofer designs

The 18LW2400 is an 18 inch extended low frequency loudspeaker designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. Compared to our industry standard 18LW1400, the 18LW2400 provides higher maximum SPL, increased program power handling and lower power compression. For optimum results we recommend amplifiers able to deliver 2400 Watt program power without clipping. Transducer design features include a large displacement suspension system which, in conjunction with a fiberglass reinforced, straight ribbed cone and the Eighteen Sound proprietary Double Silicon Spider (DSS) technology, allows an ultra-linear piston action and provides full mechanical control across the entire working range. The 100 mm (4 in) inside-outside copper voice coil based on Interleaved Sandwich Voice coil (ISV) technology provides high levels of thermal stability and durability. In order to furtherly increase power handling and reduce power compression figure, 18LW2400 uses the same voice coil ventilation technology developed for our flagship 9000 neodymium transducer series. A special low density material air diffractor has been placed into the backplate acting as a cooling system, increasing power handling capability and lowering the power compression figure. As a final result Eighteen Sound engineers obtained almost 1 dB reduction in full power power compression value if compared to 18LW1400, and an increased program power handling value of 2400 Watt. The low distortion and unmatched sound quality of the 18LW2400 has been significantly improved by Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to reduce the intermodulation and harmonic distortion while improving the transient response. 10% reduction in weight have been obtained optimizing the magnetic structure through advanced FEA CAD simulation tools. 18LW2400 is able to perform properly under inclement weather conditions: the exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the cone. In addition, the special treatment applied to top and back plates of the magnetic structure is far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter460 mm
Nominal Impedance8 Ohm
Minimum Impedance6,3 Ohm
Nominal Power Handling11200 W
Continuous Power Handling22400 W
Sensitivity398,0 dB
Frequency Range31 - 2500 Hz
Voice Coil Diameter100 mm
Winding Materialcopper
Surround ShapeTriple roll
Cone ShapeStraight
Magnet MaterialFerrite
Woofer Cone TreatmentWeather protected
Recommended Enclosure220,0 dm3
Recommended Tuning37 Hz
Resonance Frequency35 Hz
Re5,0 Ohm
Vas230,0 dm3
Sd0,12 cm2
Xmax9,5 mm
Mms192,0 g
Bl25,6 Txm
Le1,35 mH
EBP109 Hz
Overall Diameter462 mm
Bolt Circle Diameter438 mm
Baffle Cutout Diameter416,0 mm
Depth214 mm
Flange and Gasket Thickness24 mm
Net Weight11,9 kg
Shipping Weight13,8 kg
Shipping Box482 x 482 x 257 mm
9.5 mm
1.35 mH
109 Hz
Wicklung besteht aus
192.0 g
Recommended Enclosure
220.0 dm3 (7.77 ft3)
Resonanz Frequenz
35 Hz
Surround Shape
Triple roll
25.6 Txm
Netto Gewicht
12.75 kg
31 - 2500 Hz
482 x 482 x 257 mm (18.98x18.98x10.12 in)
13.8 kg (30.42 lb)
100 mm (4.0 in)
Nominaler Durchmesser
460 mm ( in)
1225.0 cm2 (189.88 in2)
438 mm (17.24 in)
Tuning Frequenz
37 Hz
Woofer Cone Treatment
Weather protected
98.0 dB
Cone Shape
416.0 mm (16.38 in)
MInimale Impedanz
6.3 Ω
Nominale Belastbarkeit
1200 W
214 mm (8.43 in)
462 mm (18.19 in)
Nominale Impedanz
8 Ω
5.0 Ω
2400 W
Flange and Gasket Thickness
24 mm (0.94 in)

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.