131,00 €
In den Warenkorb
B&C Speakers 8FW51 - 8 Zoll Lautsprecher - 8 Ohm
For simplified cabinet assembly and efficient thermal transfer to the air, our NSM series of sealed back midranges feature a cast aluminum sealed chassis, high strength neodymium motor, and large internal volume for good low frequency performance. Large voice coils provide power handling, while careful selection of suspension and cone components results in exceptional sensitivity. These dedicated narrow-bandwidth midranges offer the lowest distortion at given output of any midrange available. | |
| Nominal Diameter | 200 mm (8.0 in) |
| Nominal Impedance | 8 Ω |
| Minimum Impedance | 7.4 Ω |
| Nominal Power Handling | 200 W |
| Continuous Power Handling | 400 W |
| Sensitivity | 97.0 dB |
| Frequency Range | 70 - 5000 Hz |
| Voice Coil Diameter | 51 mm (2.0 in) |
| Winding Material | Copper |
| Former Material | Kapton |
| Winding Depth | 17.0 mm (0.65 in) |
| Magnetic Gap Depth | 10.0 mm (0.4 in) |
| Flux Density | 1.35 T |
| Surround Shape | Double Roll |
| Cone Shape | Exponential |
| Magnet Material | Ferrite |
| Spider | Single |
| Pole Design | T-Pole |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Recommended Enclosure | 12.0 dm3 (0.42 ft3) |
| Recommended Tuning | 74 Hz |
| Resonance Frequency | 74 Hz |
| Re | 5.2 Ω |
| Qes | 0.21 |
| Qms | 9.3 |
| Qts | 0.21 |
| Vas | 12.0 dm3 (0.42 ft3) |
| Sd | 220.0 cm2 (34.1 in2) |
| η₀ | 2.1 % |
| Xmax | ± 6.0 mm |
| Xvar | ± 5.0 mm |
| Mms | 27.0 g |
| Bl | 17.7 Txm |
| Le | 0.56 mH |
| EBP | 352 Hz |
| Overall Diameter | 225 mm (8.8 in) |
| Bolt Circle Diameter | 210 mm (8.3 in) |
| Baffle Cutout Diameter | 187.0 mm (7.4 in) |
| Depth | 100 mm (3.94 in) |
| Flange and Gasket Thickness | 9 mm (0.35 in) |
| Air Volume Occupied by Driver | 1.5 dm3 (0.05 ft3) |
| Net Weight | 5.3 kg (11.6 lb) |
| Shipping Units | 1 |
| Shipping Weight | 5.75 kg (12.68 lb) |
| Shipping Box | 255x255x150 mm (10.04x10.04x5.91 in) |
| Recone kit | RCK008FW518 |
Herstellerinformation
| Marke | B&C Speakers |
|---|---|
| Hersteller | B&C Speakers s.p.a. |
| mail@bcspeakers.com | |
| Telefon | +39 055 65721 |
| Anschrift | Via Poggiomoro 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY |
| Qts | 0.2054 |
|---|---|
| Verkaufsrang | 157 |
| BL (Tm) | 17.7 |
| Qes | 0.21 |
| Qms | 9.3 |
| Vas (l) | 12.0 |
| Xmax (mm) | 6.0 |
| Fs (Hz) | 74 |
| Empfindlichkeit (dB) | 97.0 |
| Re (Ohm) | 5.2 |
| Sd (m²) | 0.022 |
| Mms (g) | 27 |
| Le (mH) | 0.56 |
| Flange and Gasket Thickness | 9 mm (0.35 in) |
| Dauerbelastbarkeit | 400 W |
| Former Material | Kapton |
| Außendurchmesser | 225 mm (8.8 in) |
| MInimale Impedanz | 7.4 Ω |
| Tuning Frequenz | 74 Hz |
| Versandkarton | 255x255x150 mm (10.04x10.04x5.91 in) |
| Netto Gewicht | 5.3 kg |
| Wicklung besteht aus | Copper |
| EBP | 352 Hz |
| Recommended Enclosure | 12.0 dm3 (0.42 ft3) |
| Surround Shape | Double Roll |
| Winding Depth | 17.0 mm (0.65 in) |
| Magnetic Gap Depth | 10.0 mm (0.4 in) |
| Shipping Units | 1 |
| Nominaler Durchmesser | 200 mm (8.0 in) |
| Flux Density | 1.35 T |
| Cone Shape | Exponential |
| Einbautiefe | 100 mm (3.94 in) |
| Nominale Belastbarkeit | 200 W |
| Pole Design | T-Pole |
| Recone kit | RCK008FW518 |
| Lochkreisdurchmesser | 210 mm (8.3 in) |
| Schallwandausschnitt | 187.0 mm (7.4 in) |
| XVar | ± 5.0 mm |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Magnet | Ferrite |
| ?0 | 2.1 % |
| Versandgewicht | 5.75 kg (12.68 lb) |
| Air Volume Occupied by Driver | 1.5 dm3 (0.05 ft3) |
| Nominale Impedanz | 8 Ω |
| Frequenzbereich | 70 - 5000 Hz |
| Spider | Single |
| Schwingspulendurchmesser | 51 mm (2.0 in) |
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.