B&C Speakers 18DS115 - 18,0 Zoll Lautsprecher - 8 Ohm
BC18DS115
- 3400 W continuous program power capacity
- 116 mm (4.5 in) four layer aluminum voice coil
- 30 - 500 Hz response
- 98 dB sensitivity
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
3400 WContinuous power handling. 4.5 in (116 mm)Voice coil diameter. Neodymium Inside SlugMagnet material. This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 18DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1700watt AES power rating, 98 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range..
| Specifications | |
| Nominal Diameter | 460 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 7,0 Ohm |
| Nominal Power Handling1 | 1700 W |
| Continuous Power Handling2 | 3400 W |
| Sensitivity3 | 98,0 dB |
| Frequency Range | 30 - 500 Hz |
| Voice Coil Diameter | 116 mm |
| Winding Material | Aluminium |
| Former Material | Glass Fibre |
| Winding Depth | 40,0 mm |
| Magnetic Gap Depth | 14,0 mm |
| Flux Density | 0,8 TDesign |
| Surround Shape | Triple Roll |
| Cone Shape | Radial |
| Magnet Material | Neodym |
| Spider | Double Silicone |
| Pole Design | T-Pole |
| Woofer Cone Treatment | TWP Waterproof Both Sides |
| Recommended Enclosure | 100,0 dm3 |
| Recommended Tuning | 40 HzParameters4 |
| Resonance Frequency | 30 Hz |
| Re | 5,0 Ohm |
| Qes | 0,21 |
| Qms | 4,3 |
| Qts | 0,2 |
| Vas | 168,0 dm3 |
| Sd | 1210,0 cm2 |
| No | 2,2 % |
| Xmax | ± 16,5 mm |
| Xvar | ± 14,0 mm |
| Mms | 330,0 g |
| Bl | 39,0 Txm |
| Le | 3,85 mH |
| EBP | 142 HzMounting and Shipping Info |
| Overall Diameter | 460 mm |
| Bolt Circle Diameter | 440 mm |
| Baffle Cutout Diameter | 422,0 mm |
| Depth | 248 mm |
| Flange and Gasket Thickness | 16 mm |
| Air Volume Occupied by Driver | 10,0 dm3 |
| Net Weight | 12,0 kg |
| Shipping Units | 1 |
| Shipping Weight | 13,6 kg |
| Shipping Box | 500x495x275 mm |
| Recone kit | RCK18DS1158Discover more2 hours tes |
- Lochkreisdurchmesser
- 442 mm (17.4 in)
- Tuning Frequenz
- 40 Hz
- Flange and Gasket Thickness
- 16 mm (0.63 in)
- Qms
- 4.3
- Qes
- 0.21
- Former Material
- Glass Fibre
- Versandgewicht
- 13.6 kg (29.98 lb)
- ?0
- 2.2 %
- Schallwandausschnitt
- 422.0 mm (16.61 in)
- Woofer Cone Treatment
- TWP Waterproof Both Sides
- Shipping Units
- 1
- Schwingspulendurchmesser
- 116 mm (4.5 in)
- MInimale Impedanz
- 7.0 Ω
- Versandkarton
- 500x495x275 mm (19.69x19.49x10.83 in)
- Surround Shape
- Triple Roll
- Xmax
- 16.5 mm
- Le
- 3.85 mH
- Sd
- 1210.0 cm2 (187.55 in2)
- Re
- 5.0 Ω
- Flux Density
- 0.8 T
- Air Volume Occupied by Driver
- 10.0 dm3 (0.35 ft3)
- Empfindlichkeit
- 98.0 dB
- Nominale Impedanz
- 8 Ω
- Frequenzbereich
- 30 - 500 Hz
- Winding Depth
- 40.0 mm (1.57 in)
- XVar
- ± 14.0 mm
- Resonanz Frequenz
- 30 Hz
- BL
- 39.0 Txm
- Wicklung besteht aus
- Aluminium
- Pole Design
- T-Pole
- Außendurchmesser
- 460 mm (18.11 in)
- Cone Shape
- Radial
- Vas
- 168.0
- Nominale Belastbarkeit
- 1700 W
- Nominaler Durchmesser
- 460 mm (18.0 in)
- Recone kit
- RCK18DS1158
- Einbautiefe
- 248 mm (9.76 in)
- Magnetic Gap Depth
- 14.0 mm (0.55 in)
- EBP
- 142 Hz
- Magnet
- Neodymium Inside Slug
- Dauerbelastbarkeit
- 3400 W
- Spider
- Double Silicone
- Qts
- 0.2
- Mms
- 330.0 g
- Netto Gewicht
- 12.0 kg
- Recommended Enclosure
- 100.0 dm3 (3.53 ft3)
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.