Artikel 11 von 11

Eighteensound 10CX650 10inch Coaxial Lautsprecher 8 Ohm

Artikelnummer: ES10CX650

Single Magnet Ferrite Coaxial Transducer

Sie sparen: 9%

Sofort lieferbar.

Versandkostenfreie Lieferung voraussichtlich zwischen Monday, 01.04 und Wednesday, 03.04 nach Deutschland

355,00 €
? Warenkorb in PayPal anzeigen

Eighteensound 10CX650 10inch Coaxial Lautsprecher 8 Ohm


ES10CX650

  • 94.0 dB LF/106.5 dB HF SPL 1W/1m average sensitivity
  • Single magnet motor
  • 400W LF - 140W HF maximum program power handling
  • 65 mm (2.5”) LF voice coil
  • 44 mm (1.75”) HF PEN diaphragm
  • Proprietary Phase Plug design
  • HF copper sleeve for reduced distortion and higher output
  • 90 degrees nominal conical dispersion
  • Atmos™ ready*
  • Extended LF design
  • Suitable for very compact enclosures and stage monitors

The 10CX650 is a 10" - 1" coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 30 lt, with a nominal dispersion of 90 degrees.The high force ceramic single magnet structure makes the 10CX650 a lightweight speaker for its performance class - only 6 kg (13.2 lb).The 65 mm (2.5 in) LF edgewound CCAW voice coil employs our Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglass former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motion energy. This results in an extremely linear motor assembly.The low profile curvilinear LF cone provides a smooth response within its intended frequency range and maximum reliability under high mechanical stress.Equipped with a proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give smooth coherent wavefront at the horn entrance in all working frequency ranges with a high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces inductance values above 10kHz, improving phase and impedance linearization.The HF diaphragm assembly is made with a proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability, the polyethylene shows consistent behavior throughout its whole working life. Moreover, this particular material with its very high value of elasticity modulus is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response.An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this former material is suitable for use in damp and wet environments.A specific dedicated HF driver throat design has also been chosen, maximizing the cone’s profile coupling.

Nominal Diameter260 mm
Nominal Impedance8 Ohm
Minimum Impedance LF6,1 Ohm
Frequency Range60 - 4800 Hz
Dispersion Angle190 °
Woofer Cone TreatmentHumidity repellent
LF Sensitivity294,0 dB
LF Nominal Power Handling3200 W
LF Continuous Power Handling4400 W
LF Voice Coil Diameter65 mm
LF Winding MaterialEdgewound copper
HF Sensitivity5106,5 dB
HF Nominal Power Handling670 W
HF Continuous Power Handling7140 W
HF Voice Coil Diameter44 mm
HF Winding MaterialEdge wound Aluminum
Diaphragm MaterialPEN
Recommended Crossover81,6 kHz
Resonance Frequency54 Hz
Re5,1 Ohm
Qes0,39
Qms5,9
Qts0,35
Vas36,4 dm3
Sd346,0 cm2
No1,5 %
Xmax6,0 mm
Mms39,5 g
Bl14,0 Txm
Le0,9 mH
EBP138 Hz
Overall Diameter260 mm
Bolt Circle Diameter243 mm
Baffle Cutout Diameter230 mm
Depth155 mm
Flange and Gasket Thickness8 mm
Net Weight6,2 kg
Shipping Weight6,8 kg
Shipping Box275x275x195 mm
Qts
0.35
LF Voice Coil Diameter
65 mm (2.5 in)
Qms
5.9
Schallwandausschnitt
230 mm (9.06 in)
HF Nominal Power Handling
70 W
Sd
346.0 cm2 (53.63 in2)
HF Sensitivity
106.5 dB
Netto Gewicht
6.2 kg
Versandkarton
275x275x195 mm (10.83x10.83x7.68 in)
Mms
39.5 g
Nominaler Durchmesser
260 mm (10.24 in)
Qes
0.39
LF Continuous Power Handling
400 W
LF Winding Material
Edgewound copper
Frequenzbereich
60 - 4800 Hz
Resonanz Frequenz
54 Hz
Flange and Gasket Thickness
8 mm (0.31 in)
Recommended Crossover
1.6 kHz
Außendurchmesser
260 mm (10.24 in)
LF Sensitivity
94.0 dB
Nominale Impedanz
8 Ω
Einbautiefe
155 mm (6.1 in)
Diaphragm Material
PEN
Vas
36.4
HF Continuous Power Handling
140 W
Versandgewicht
6.8 kg (14.99 lb)
BL
14.0 Txm
Woofer Cone Treatment
Humidity repellent
HF Voice Coil Diameter
44 mm (1.75 in)
Xmax
6.0 mm
?0
1.5 %
LF Nominal Power Handling
200 W
Dispersion Angle
90 °
EBP
138 Hz
HF Winding Material
Edge wound Aluminum
Le
0.9 mH
MInimale Impedanz Tiefton
6.1 Ω
Re
5.1 Ω
Lochkreisdurchmesser
243 mm (9.57 in)

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.