126,40 €
In den Warenkorb
Eighteensound HD1050 1inch Hochtontreiber 8 Ohm
ESHD1050
- 107 dB SPL 1W / 1m average sensitivity
- 1 inch exit throat
- 44 mm (1 3/4 inch) voice coil diameter
- 100 Watt program power handling
- Titanium dome over PEN suspension
- Proprietary phase plug design
The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,4kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.
| Throat Diameter | 25 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 7,0 Ohm |
| Nominal Power Handling1 | 50 W |
| Continuous Power Handling2 | 100 W |
| Sensitivity3 | 107,0 dB |
| Frequency Range | 1,6 - 20,0 kHz |
| Recommended Crossover4 | 1,4 kHz |
| Voice Coil Diameter | 44 mm |
| Winding Material | Aluminum |
| Diaphragm Material | Titanium - Pen |
| Flux Density | 1,6 T |
| Magnet Material | Ferrite |
| Overall Diameter | 110 mm |
| Depth | 60 mm |
| Net Weight | 1,6 kg |
| Shipping Weight | 1,7 kg |
| Shipping Box | 110x110x63 mm |
Herstellerinformation
| Marke | Eighteensound |
|---|---|
| Hersteller | Eighteen Sound SRL |
| info@eighteensound.it | |
| Telefon | (+39) 0522 1861800 |
| Anschrift | Via Botticelli 8 1 - Loc. Vallina, 42124 Mancasale (Reggio Emilia), Italien |
| Verkaufsrang | 149 |
|---|---|
| Empfindlichkeit (dB) | 107.0 |
| Nominale Belastbarkeit | 50 W |
| Versandgewicht | 1.7 kg (3.75 lb) |
| Versandkarton | 110x110x63 mm (4.33x4.33x2.48 in) |
| Netto Gewicht | 1.6 kg |
| MInimale Impedanz | 7.0 Ω |
| Einbautiefe | 60 mm (2.36 in) |
| Nominale Impedanz | 8 Ω |
| Wicklung besteht aus | Aluminum |
| Magnet | Ferrite |
| Dauerbelastbarkeit | 100 W |
| Throat Diameter | 25 mm (1.0 in) |
| Diaphragm Material | Titanium - Pen |
| Frequenzbereich | 1.6 - 20.0 kHz |
| Schwingspulendurchmesser | 44 mm (1.75 in) |
| Recommended Crossover | 1.4 kHz |
| Flux Density | 1.6 T |
| Außendurchmesser | 110 mm (4.33 in) |
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.