Eighteensound 6ND430 6.5inch Lautsprecher Chassis 8 Ohm
ES6ND430
- 92,5 dB SPL 1W / 1m average sensitivity
- 45 mm (1,77 in) aluminum voice coil
- 200 W AES power handling
- Neodymium motor assembly
- Weather protected cone
- Improved heat dissipation via unique basket design
- Ideal for compact two way and multiway systems
The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure. Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes. The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization.
| Nominal Diameter | 152 mm |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 6,1 Ohm |
| Nominal Power Handling1 | 200 W |
| Continuous Power Handling2 | 260 W |
| Sensitivity3 | 92,5 dB |
| Frequency Range | 63 - 5500 Hz |
| Voice Coil Diameter | 44 mm |
| Winding Material | aluminum |
| Surround Shape | Single roll - Rubber |
| Cone Shape | Curvilinear |
| Magnet Material | Neo |
| Woofer Cone Treatment | Weather protected |
| Recommended Enclosure | 25,0 dm3 |
| Recommended Tuning | 62 Hz |
| Resonance Frequency | 61 Hz |
| Re | 5,5 Ohm |
| Qes | 0,28 |
| Qms | 6,5 |
| Qts | 0,27 |
| Vas | 12,6 dm3 |
| Sd | 133,0 cm2 |
| Xmax | 5,0 mm |
| Mms | 13,3 g |
| Bl | 10,0 Txm |
| Le | 0,28 mH |
| EBP | 217 Hz |
| Overall Diameter | 162 mm |
| Bolt Circle Diameter | 170 mm |
| Baffle Cutout Diameter | 148,0 mm |
| Depth | 73 mm |
| Flange and Gasket Thickness | 9 mm |
| Net Weight | 1,25 kg |
| Shipping Weight | 1,45 kg |
| Shipping Box | 185x170x85 mm |
- Versandgewicht
- 1.45 kg (3.2 lb)
- Cone Shape
- Curvilinear
- Re
- 5.5 Ω
- Empfindlichkeit
- 92.5 dB
- Außendurchmesser
- 162 mm (6.38 in)
- Wicklung besteht aus
- aluminum
- Xmax
- 5.0 mm
- Netto Gewicht
- 1.25 kg
- Lochkreisdurchmesser
- 170 mm (6.69 in)
- MInimale Impedanz
- 6.1 Ω
- Tuning Frequenz
- 62 Hz
- Frequenzbereich
- 63 - 5500 Hz
- Woofer Cone Treatment
- Weather protected
- Sd
- 133.0 cm2 (20.62 in2)
- Schallwandausschnitt
- 148.0 mm (5.83 in)
- Dauerbelastbarkeit
- 260 W
- Recommended Enclosure
- 25.0 dm3 (0.88 ft3)
- Resonanz Frequenz
- 61 Hz
- Mms
- 13.3 g
- EBP
- 217 Hz
- Nominale Impedanz
- 8 Ω
- Surround Shape
- Single roll - Rubber
- Nominaler Durchmesser
- 152 mm ( in)
- Flange and Gasket Thickness
- 9 mm (0.35 in)
- BL
- 10.0 Txm
- Vas
- 12.6
- Qes
- 0.28
- Einbautiefe
- 73 mm (2.87 in)
- Qms
- 6.5
- Nominale Belastbarkeit
- 200 W
- Qts
- 0.27
- Schwingspulendurchmesser
- 44 mm (1.75 in)
- Le
- 0.28 mH
- Magnet
- Neo
- Versandkarton
- 185x170x85 mm (7.28x6.69x3.35 in)
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.