Eighteensound 12ND610 12inch Lautsprecher Chassis

Artikelnummer: ES12ND610

Very High Output MB Neodymium Transducer

Gewicht: 4 kg
Sie sparen: 10%
360,00 €
Mengenstaffelpreise
Von 2 Stück 318,70 €
Von 4 Stück 315,40 €
Von 8 Stück 312,20 €
Von 16 Stück 308,90 €
Sofort lieferbar Lieferzeit: 1 - 3 Tage

Eighteensound 12ND610 12inch Lautsprecher Chassis


ES12ND610

  • 101 dB SPL 1W / 1m average sensitivity
  • 75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
  • 450 W AES power handling
  • Neodymium magnet assembly
  • Humidity resistant cone
  • Suitable for midbass frequency reproduction

The 12ND610 has been specifically designed for use either as a midbass driver in compact 2-way reflex enclosures or as a direct radiating or horn loaded, dedicated midrange driver, in multi-way touring and fixed installation concert and arena systems.The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange because the external magnet configuration is considerably more efficient than traditional under-pole magnet topology.Consequently, high levels of force factor and power handling with an optimum power to weight ratio have been achieved.Direct coupling of the special design basket and magnetic assembly with the large heat sink facilitates thermal flux through the ambient air, increasing the power handling capabilities and lowering the power compression.The curvilinear paper cone has been created with a special high strength wood pulp designed to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by a multiroll suspension formed from a linen-like material which is more resistant to aging and fatigue than traditional materials.The 12ND610 implements Interleaved Sandwich Voice coil technology (ISV), in which an aluminum coil is wound inside and outside a high strength fiberglas former, providing a better thermal and mechanical performance than conventional coils.A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12ND610 far more resistant to the corrosive effects of salts and oxidization.

Nominal Diameter300 mm
Nominal Impedance16 Ohm
Minimum Impedance14,5 Ohm
Nominal Power Handling1450 W
Continuous Power Handling2700 W
Sensitivity3101,0 dB
Frequency Range80 - 5000 Hz
Voice Coil Diameter75 mm
Winding Materialaluminum
Surround ShapeTriple roll
Cone ShapeCurvilinear
Magnet MaterialNeo
Woofer Cone TreatmentWeather protected
Recommended Enclosure40,0 dm3
Recommended Tuning65 Hz
Resonance Frequency50 Hz
Re11,9 Ohm
Qes0,22
Qms4,56
Qts0,21
Vas85,0 dm3
Sd530,0 cm2
Xmax3,5 mm
Mms45,0 g
Bl27,9 Txm
Le0,76 mH
EBP227 Hz
Overall Diameter315 mm
Bolt Circle Diameter296 mm
Baffle Cutout Diameter282,0 mm
Depth141 mm
Flange and Gasket Thickness11 mm
Net Weight4,7 kg
Shipping Weight5,1 kg
Shipping Box332 x 332 x 184 mm
Voice Coil Diameter
75 mm
Continuous Power Handling2
700 W
Recommended Enclosure
40,0 dm3
Re
11,9 Ohm
Qts
0,21
Shipping Box
332 x 332 x 184 mm
Minimum Impedance
14,5 Ohm
Baffle Cutout Diameter
282,0 mm
Overall Diameter
315 mm
Nominal Impedance
16 Ohm
Cone Shape
Curvilinear
Net Weight
4,7 kg
Bl
27,9 Txm
Resonance Frequency
50 Hz
Depth
141 mm
Qms
4,56
Shipping Weight
5,1 kg
Surround Shape
Triple roll
EBP
227 Hz
Winding Material
aluminum
Woofer Cone Treatment
Weather protected
Magnet Material
Neodym
Flange and Gasket Thickness
11 mm
Frequency Range
80 - 5000 Hz
Bolt Circle Diameter
296 mm
Xmax
3,5 mm
Le
0,76 mH
Qes
0,22
Nominal Diameter
300 mm
Vas
85,0 dm3
Sensitivity3
101,0 dB
Mms
45,0 g
Recommended Tuning
65 Hz
Nominal Power Handling1
450 W
Sd
530,0 cm2

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.