Eighteensound HD1030 1inch Hochtontreiber 8 Ohm

Artikelnummer: ESHD1030

HF Compression Driver

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Monday, 01.04 und Wednesday, 03.04 nach Deutschland

Mengenstaffelpreise
Von 2 Stück 92,41 €
Von 4 Stück 89,59 €
Von 8 Stück 88,64 €
Von 14 Stück 86,76 €
? Warenkorb in PayPal anzeigen

Eighteensound HD1030 1inch Hochtontreiber 8 Ohm


ESHD1030

  • 1 inch exit throat
  • 106 dB SPL 1W / 1m average sensitivity
  • 34,4 mm (1 1/3 inch) voice coil diameter
  • 60 Watt program power handling
  • Titanium diaphragm
  • Proprietary phase plug design
  • Usable in two way or multiway systems

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems. The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the HD1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1.5kHz up to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. The HD1030 powerful ceramic magnet assembly has been designed to obtain 15 KGauss in the gap within a compact ferrite motor structure.

Throat Diameter25 mm
Nominal Impedance8 Ohm
Minimum Impedance6,5 Ohm
Nominal Power Handling130 W
Continuous Power Handling260 W
Sensitivity3106,0 dB
Frequency Range1,8 - 20,0 kHz
Recommended Crossover41,8 kHz
Voice Coil Diameter34 mm
Winding MaterialAluminum
Diaphragm MaterialTitanium
Flux Density1,5 T
Magnet MaterialFerrite
Overall Diameter91 mm
Depth51 mm
Net Weight1,0 kg
Shipping Weight1,1 kg
Shipping Box97x97x58 mm
Netto Gewicht
1.0 kg
Versandkarton
97x97x58 mm (3.82x3.82x2.28 in)
Empfindlichkeit
106.0 dB
Dauerbelastbarkeit
60 W
Versandgewicht
1.1 kg (2.43 lb)
MInimale Impedanz
6.5 Ω
Außendurchmesser
91 mm (3.58 in)
Frequenzbereich
1.8 - 20.0 kHz
Flux Density
1.5 T
Wicklung besteht aus
Aluminum
Throat Diameter
25 mm (1.0 in)
Diaphragm Material
Titanium
Recommended Crossover
1.8 kHz
Schwingspulendurchmesser
34 mm (1.35 in)
Einbautiefe
51 mm (2.01 in)
Nominale Belastbarkeit
30 W
Nominale Impedanz
8 Ω
Magnet
Ferrite

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.