Eighteensound 15MB1000 15inch Lautsprecher Chassis 8 Ohm

Artikelnummer: ES15MB1000

High Output MB Ferrite Transducer

Lieferzeit ca. 2 - 4 Werktage

Versandkostenfreie Lieferung voraussichtlich zwischen Monday, 01.04 und Wednesday, 03.04 nach Deutschland

Mengenstaffelpreise
Von 2 Stück 320,17 €
Von 4 Stück 310,37 €
Von 8 Stück 307,10 €
Von 14 Stück 300,56 €
? Warenkorb in PayPal anzeigen

Eighteensound 15MB1000 15inch Lautsprecher Chassis 8 Ohm


ES15MB1000

  • 98 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
  • 850 W AES power handling
  • Carbon fiber reinforced cellulose cone
  • Copper shorting ring for linear impedance and reduced distortion figure
  • Double Demodulating Ring (DDR) for lower distortion
  • Improved heat dissipation via unique basket design
  • Weather protected cone and plates for outdoor usage
  • Ideal for compact reflex enclosures, two-way systems and stage monitoring applications

The 15MB1000 is a 100mm (4 in) voice coil 380mm (15 in) diameter mid-low frequency transducer which has been created to meet requirements for low bass applications where a significant extension in mid frequency is needed. It has been designed for use in compact reflex enclosures, in two-way systems with 1.4" - 2" compression drivers and stage monitoring applications. 15MB1000 is also suitable for horn loaded applications in multiway systems. The low profile, carbon fiber reinforced, smooth curvilinear cone provides smooth response within its intended frequency range and exceptional strength with maximum reliability under high mechanical stress. The copper shorting ring on the plates has been adopted to reduce inductance and improve transient response. Intermodulation distortion has also been significantly improved. The low distortion and unmatched sound quality of the 15MB1000 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to dramatically reduce the intermodulation and harmonic distortion while improving the transient response. The 100mm aluminum voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motive energy. This results in an extremely linear motor assembly. Excellent heat dissipation has been achieved by incorporating air channels between the basket and the magnetic top plate. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap. Considerable attention has also been given to the design of the magnetic structure in order to maximize flux concentration and force factor in the gap. Due to the increasing use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is a key feature of the 15MB1000. This has been achieved using an exclusive treatments which allows the cone and the magnetic plate to resist corrosion whilst also rendering the cone water repellent.

Nominal Diameter380 mm
Nominal Impedance8 Ohm
Minimum Impedance6,0 Ohm
Nominal Power Handling1850 W
Continuous Power Handling21200 W
Sensitivity398,0 dB
Frequency Range45 - 5100 Hz
Voice Coil Diameter100 mm
Winding Materialaluminum
Surround ShapeTriple roll
Cone ShapeCurvilinear
Magnet MaterialFerrite
Woofer Cone TreatmentWeather protected
Recommended Enclosure100,0 dm3
Recommended Tuning55 Hz
Resonance Frequency48 Hz
Re5,5 Ohm
Qes0,32
Qms6,0
Qts0,31
Vas132,5 dm3
Sd850,0 cm2
Xmax6,0 mm
Mms85,0 g
Bl21,0 Txm
Le1,5 mH
EBP150 Hz
Overall Diameter387 mm
Bolt Circle Diameter370 mm
Baffle Cutout Diameter353,0 mm
Depth156 mm
Flange and Gasket Thickness19 mm
Net Weight11,4 kg
Shipping Weight13,4 kg
Shipping Box405 x 405 x 214 mm
Vas
132.5
Netto Gewicht
11.4 kg
Wicklung besteht aus
aluminum
Empfindlichkeit
98.0 dB
Schwingspulendurchmesser
100 mm (4.0 in)
Resonanz Frequenz
48 Hz
Mms
85.0 g
BL
21.0 Txm
Cone Shape
Curvilinear
Versandgewicht
12.4 kg (27.34 lb)
Recommended Enclosure
100.0 dm3 (3.53 ft3)
Nominaler Durchmesser
380 mm ( in)
Tuning Frequenz
55 Hz
MInimale Impedanz
6.0 Ω
Surround Shape
Triple roll
Einbautiefe
156 mm (6.14 in)
Xmax
6.0 mm
Lochkreisdurchmesser
370 mm (14.57 in)
Schallwandausschnitt
353.0 mm (13.9 in)
Woofer Cone Treatment
Weather protected
Dauerbelastbarkeit
1200 W
Re
5.5 Ω
Sd
850.0 cm2 (131.75 in2)
Nominale Belastbarkeit
850 W
EBP
150 Hz
Flange and Gasket Thickness
19 mm (0.75 in)
Nominale Impedanz
8 Ω
Qes
0.32
Frequenzbereich
45 - 5100 Hz
Qms
6.0
Magnet
Ferrite
Le
1.5 mH
Außendurchmesser
387 mm (15.24 in)
Versandkarton
405 x 405 x 214 mm (15.94x15.94x8.43 in)
Qts
0.31

Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.

Es liegen keine Bewertungen zu diesem Artikel vor.