Blue-Music/Boxenbau/RCF-ChassisArtikel

RCF LF15N401 Basslautsprecher 292,00 €

High power 15'' Woofer

RCF MB15N351 Basslautsprecher 229,00 €

The MB15N351 is designed to provide an excellent frequency response linearity with very low distortion.

A very strong neodymium magnetic structure guarantee dynamic and precision, a new and unique 3,5ö voice coil design provides a very high power handling, especially recommended in comparison to a standard 3ö voice coil. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation to minimize the power compression and provide higher power handling.

Applications
The MB15N351 is ideal for use in applications where is required a very high efficiency and linearity with high power handling. ItÆs especially recommended for high powered multi-way system.

-	3,5-inch, inside-outside copper voice coil
-	1300 Watt continuous program power handling
-	100 dB Sensitivity
-	40 Hz - 3 kHz Frequency range
-	Dual-forced air ventilation for minimum power compression
-	Dual spider design with silicon based damping control

Nominal Diameter	380/15	mm/inch
Rated Impedance	8	Ohm
Program Power	1300	Watts
Power handling capacity	650	Watts
Sensitivity 1W, 1m	100	dB
Frequency Range	40-3000	Hz
Effective Piston Diameter	330/13	mm/inch
Maximum Excursion Before Damage	39/1.5	mm/inch
Minimum Impedance	6,8	Ohm
Voice Coil Diameter	87/3.4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	16.5/0.65	mm/inch
Number of layers	2	ááá
Kind of layer	inside/outside	ááá
Thickness Top Plate Depth	11/0.43	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M-roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	42	Hz
DC resistance	Re	5.6	Ohm
Mechanical factor	Qms	4.0	ááá
Electrical factor	Qes	0.24	ááá
Total factor	Qts	0.22	ááá
BL factor	BL	22.5	T - m
Effective Moving Mass	Mms	80	gr
Equivalent Cas air load	Vas	191	liters
Effective piston area	Sd	0.0855	m2
Max. linear excursion	Xmax	5.5	mm
Voice - coil inductance @ 1KHz	Le1k	1.65	mH
Half-space efficiency	Eff	5.68	%

MOUNTING INFORMATION

Overall Diameter	393/15.5	mm/inch
Bolt Circle Diameter	371-376/14.6-14-8	mm
Bolt Hole Diameter	6.5/0.3	mm/inch
Front Mount Baffle Cut-out	354/13.9	mm/inch
Rear Mount Baffle Cut-out	354/14.2	mm/inch
Depth	164/6.4	mm/inch
Volume occupied by the driver	3.8/0.13	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	5.0/11.0	Kg/lbs

RCF LF12N401 Basslautsprecher 234,00 €

High power 12'' Woofer

RCF MB12N351 Basslautsprecher 184,00 €

The MB12N351 is designed to provide an excellent frequency response linearity with very low distortion.

A very strong neodymium magnetic structure guarantee dynamic and precision, a new and unique 3,5ö voice coil design provides a very high power handling, especially recommended in comparison to a standard 3ö voice coil. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation to minimize the power compression and provide higher power handling.

Applications
The MB12N351 is ideal for use in applications where is required a very high efficiency and linearity with high power handling. ItÆs especially recommended for high powered multi-way system.

-	3,5-inch, inside-outside copper voice coil
-	1300 Watt continuous program power handling
-	99 dB Sensitivity
-	45 Hz - 3 kHz Frequency range
-	Dual-forced air ventilation for minimum power compression
-	Single spider design with silicon based damping control

Nominal Diameter	300/12	mm/inch
Rated Impedance	8	Ohm
Program Power	1300	Watts
Power handling capacity	650	Watts
Sensitivity 1W, 1m	99	dB
Frequency Range	45-3000	Hz
Effective Piston Diameter	260/10.2	mm/inch
Maximum Excursion Before Damage	39/1.5	mm/inch
Minimum Impedance	7.0	Ohm
Voice Coil Diameter	87/3.4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	16.5/0.65	mm/inch
Number of layers	2	ááá
Kind of layer	inside/outside	ááá
Thickness Top Plate Depth	11/0.43	mm/inch
Cone Material	No pressed Pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M-roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	55	Hz
DC resistance	Re	5.6	Ohm
Mechanical factor	Qms	4.5	ááá
Electrical factor	Qes	0.21	ááá
Total factor	Qts	0.20	ááá
BL factor	BL	22.5	T - m
Effective Moving Mass	Mms	54	gr
Equivalent Cas air load	Vas	61	liters
Effective piston area	Sd	0.0053	m2
Max. linear excursion	Xmax	5.5	mm
Voice - coil inductance @ 1KHz	Le1k	1.65	mH
Half-space efficiency	Eff	4.66	%

MOUNTING INFORMATION

Overall Diameter	320/12.6	mm/inch
Bolt Circle Diameter	293-304/11.5-12	mm
Bolt Hole Diameter	6.5/0.3	mm/inch
Front Mount Baffle Cut-out	282/11.1	mm/inch
Rear Mount Baffle Cut-out	284/11.2	mm/inch
Depth	138/5.4	mm/inch
Volume occupied by the driver	2.2/0.077	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	4.4/9.7	Kg/lbs

RCF MR10N301 Mitteltonlautsprecher 266,00 €

The MR10N301 is a high efficiency, high power midrange specially designed to provide superior sound pressure level in a very compact size.

The total weight is reduced to less than half of a comparable ceramic midrange thanks to an incredibly powerful neodymium magnet assembly. The unique sealed basket design doesnÆt require a back sealing chamber, simplifying the cabinet design and improving heat dissipation. Every detail of this speaker has been optimized to offer the best response and perfect control to the midrange frequencies.

Applications
The MR10N301 is especially designed for horn-loading and line array configurations. The ideal range of application are mid and mid-low frequencies. The combination of the 3ö voice coil, the neodymium motor and the heat sink basket design makes this driver the ideal solution for the most demanding applications.

-	3-inch Inside/outside voice coil, high BL neodymium design
-	Very high sensitivity (109 dB/1w in horn loaded application), very high BL factor
-	700 Watt Continuous program power handling
-	Frequency range: 150 Hz - 2 kHz (mid and mid-low frequencies)
-	Unique aluminum sealed basket featuring vented fin heat dissipation design
-	Calibrated back volume for a perfect time domain transient reproduction

Nominal Diameter	260/10	mm/inch
Rated Impedance	8	Ohm
Program Power	600	Watts
Power handling capacity	300	Watts
Sensitivity 1W, 1m	102	dB
Frequency Range	150-2000	Hz
Effective Piston Diameter	210/8.3	mm/inch
Maximum Excursion Before Damage	20/0.8	mm/inch
Minimum Impedance	8.5	Ohm
Voice Coil Diameter	76/3	mm/inch
Voice Coil Material	Aluminium	ááá
Voice Coil Winding Depth	11/0,4	mm/inch
Number of layers	2	ááá
Kind of layer	Inside/Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M- roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	250	Hz
DC resistance	Re	6.2	Ohm
Mechanical factor	Qms	6.48	ááá
Electrical factor	Qes	0.72	ááá
Total factor	Qts	0.65	ááá
BL factor	BL	20.7	T - m
Effective Moving Mass	Mms	31.8	gr
Equivalent Cas air load	Vas	2.2	liters
Effective piston area	Sd	0,035	m2
Max. linear excursion	Xmax	1.4	mm
Voice - coil inductance @ 1KHz	Le1k	1.17	mH
Half-space efficiency	Eff	9.26	%

MOUNTING INFORMATION

Overall Diameter	272/10.7	mm/inch
Bolt Circle Diameter	244.5/9.6	mm
Bolt Hole Diameter	7/0.3	mm/inch
Front Mount Baffle Cut-out	235/9.3	mm/inch
Rear Mount Baffle Cut-out	232/9.1	mm/inch
Depth	124/4.9	mm/inch
Volume occupied by the driver	5.0	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	3.9/8.6	Kg/lbs

RCF MR8N301 Mitteltonlautsprecher 239,00 €

High efficiency 8'' Midrange

RCF L18P300 Basslautsprecher 278,00 €

In production for over 10 years, the L18P300 is an industry standard.

The sturdy magnetic unit, with 15 mm thick plates and specially designed suspensions ensure an excellent control of amplitude of over +/- 12 millimetres. The special cooling system with forced air ventilation offer a great heat dissipation and the minimum levels of power compression available on the market. Voice coil construction, suspensions and cone materials are upgraded in order to withstand up to a Kilowatt RMS power.

Applications
The L18P300 finds its best application in both bass reflex and band pass systems. Its capacity to reproduce extremely low frequencies along with extraordinary definition make it a no compromise woofer in its category, ideal for both live and recorded music.

-	4-inch Inside/outside copper voice coil
-	2000 Watt continuous program power handling
-	97 dB Sensitivity
-	35 Hz - 1 kHz Frequency range
-	Forced air ventilation and 15 mm top plate for minimum power compression
-	Dual spider design with silicon based dampening control
-	M-roll surround and exponential cone geometry

Nominal Diameter	460/18	mm/inch
Rated Impedance	8	Ohm
Program Power	2000	Watts
Power handling capacity	1000	Watts
Sensitivity 1W, 1m	97	dB
Frequency Range	35-1000	Hz
Effective Piston Diameter	380/15	mm/inch
Maximum Excursion Before Damage	40/1.6	mm/inch
Minimum Impedance	6.0	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	23/0.9	mm/inch
Number of layers	2	ááá
Kind of layer	Inside/Outside	ááá
Thickness Top Plate Depth	15/0.6	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	33	Hz
DC resistance	Re	5.0	Ohm
Mechanical factor	Qms	8.3	ááá
Electrical factor	Qes	0.34	ááá
Total factor	Qts	0.33	ááá
BL factor	BL	23.5	T - m
Effective Moving Mass	Mms	180	gr
Equivalent Cas air load	Vas	226	liters
Effective piston area	Sd	0.113	m2
Max. linear excursion	Xmax	7.8	mm
Voice - coil inductance @ 1KHz	Le1k	1.9	mH
Half-space efficiency	Eff	2.30	%

MOUNTING INFORMATION

Overall Diameter	470/18.5	mm/inch
Bolt Circle Diameter	438	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	416/16.4	mm/inch
Rear Mount Baffle Cut-out	418/16.5	mm/inch
Depth	209/8.3	mm/inch
Volume occupied by the driver	6.5	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	14/31.1	Kg/lbs

RCF L18S801 Basslautsprecher 289,00 €

L18S801

WOOFER

The L18S801 is the RCF classical high efficiency 18" woofer.

A perfect blend of voice coil length, moving mass weight and suspensions control makes this transducer the preferred solution for many speakers and rental companies.

Voice coil construction, suspension and cone materials are upgrade in order to withstand up to 700 watt RMS power.

Features
4-inch, fiberglass inside/outside copper voice coil
1400W continuous program power handling
99.5 dB Sensitivity
38 Hz – 1 kHz Frequency range
Dual spider design with silicon based dampening control
M-roll surround and exponential cone geometry

Applications

The L18S801 finds its best application in band pass, reflex-horn and horn loaded system.
It is a perfect compact bass reflex solution for live music, when the maximum punch is required.
It is one of the faster transducers in its category.

GENERAL SPECIFICATION
Nominal Diameter:	460 / 18 mm/inch
Rated Impedance:	8 Ω
Program Power:	1400 Watts AES
Power handling capacity:	700 Watts AES
Sensitivity:	99.5 dB
Frequency Range:	38 Hz	÷ 1000 Hz
Effective Piston Diameter:	380 / 15 mm/inch
Max Excursion Before Damage (peak to peak):	40 / 1.6 mm/inch
Minimum Impedance:	6.3 Ω
Voice Coil Diameter:	100 / 4 mm/inch
Voice Coil Material:	Copper
Voice Coil Winding Depth:	18.5 / 0.7 mm/inch
Number of layers:	2
Kind of layer:	inside / outside
Top Plate Thickness:	10 / 0.4 mm/inch
Cone Material:	No pressed pulp
Cone Design:	Curved
Surround Material:	Polycotton
Surround Design:	M - roll

THIELE SMALL PARAMETERS
Resonance frequency:	39 Hz
DC resistance:	4.9 Ω
Mechanical factor:	8.3
Electrical factor:	0.30
Total factor:	0.29
BL Factor:	24.5 T · m
Effective Moving Mass:	148 gr
Equivalent Cas air load:	206 liters
Effettive piston area:	0.113 m²
Max. linear excursion (mathematical):	6.8 mm
Voice - coil inductance @ 1KHz:	1.7 mH
Half-space efficiency:	3.93 %

MOUNTING INFORMATION
Overall Diameter:	470 / 18.5 mm/inch
Bolt Circle Diameter:	438 / 17.2 mm/inch
Bolt Hole Diameter:	8 / 0.3 mm/inch
Front Mount Baffle Cut-out:	416 / 16.4 mm/inch
Rear Mount Baffle Cut-out:	416 / 16.4 mm/inch
Depth:	209 / 8.3
Volume occupied by the driver:	6.5 / 0.23 liters/ft³
Net Weight	13.1 / 29.1 Kg/Lbs

SHIPPING INFORMATION
Shipping Weight:	13.8 / 30.7 Kg/Lbs

RCF L18P200N Basslautsprecher 289,00 €

The L18P200N is the RCF classical extended low frequency 18ö woofer.

Generous voice coil length, heavier moving mass weight and very low resonance for perfect low frequency reproduction. Remarkable the linearity in the application range. Special treatments are applied to cone surface and surround for optimum dampening.

Applications
The L18P200N finds its best application in bass reflex enclosures. It is a perfect solution for recorded music, cinema subwoofers, very low frequency monitoring and applications where very low frequency linearity is required.

-	4-inch, Kapton former copper voice coil
-	1600 Watt continuous program power handling
-	96 dB Sensitivity
-	27 Hz - 1 kHz Frequency range
-	Triple roll damped surround
-	Corrugated straight damped cone

Nominal Diameter	460/18	mm/inch
Rated Impedance	8	Ohm
Program Power	1600	Watts
Power handling capacity	800	Watts
Sensitivity 1W, 1m	96	dB
Frequency Range	27-1000	Hz
Effective Piston Diameter	380/15	mm/inch
Maximum Excursion Before Damage	36/1.4	mm/inch
Minimum Impedance	7.5	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	24/0.9	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	9/0.35	mm/inch
Cone Material	No pressed pulp treat	ááá
Cone Design	Straight	ááá
Surround Material	Polycotton treat	ááá
Surround Design	Triple roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	28	Hz
DC resistance	Re	6.3	Ohm
Mechanical factor	Qms	7.1	ááá
Electrical factor	Qes	0.32	ááá
Total factor	Qts	0.31	ááá
BL factor	BL	23.1	T - m
Effective Moving Mass	Mms	155	gr
Equivalent Cas air load	Vas	380	liters
Effective piston area	Sd	0.113	m2
Max. linear excursion	Xmax	9.8	mm
Voice - coil inductance @ 1KHz	Le1k	2.2	mH
Half-space efficiency	Eff	2.51	%

MOUNTING INFORMATION

Overall Diameter	470/18.5	mm/inch
Bolt Circle Diameter	438	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	416/16.4	mm/inch
Rear Mount Baffle Cut-out	418/16.5	mm/inch
Depth	180/7.1	mm/inch
Volume occupied by the driver	6.2	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	13.1/29.1	Kg/lbs

RCF LF15G401 Basslautsprecher 222,00 €

Very high power 15'' Woofer

RCF L15P200AK Basslautsprecher 215,00 €

The L15P200AK is the RCF classical extended low frequency 15ö woofer.

Generous voice coil length, heavier moving mass weight and very low resonance frequency for perfect low frequency reproduction. Remarkable the linearity in the application range. Special treatments are applied to cone surface and surround for optimum dampening.

Applications
The L15P200AK finds its best application in bass reflex enclosures. It is a perfect solution for recorded music, cinema speakers, very low frequency monitoring and applications where low frequency linearity is required. In 2 way systems shall be used in conjunction to large format compression driver, very good for linear 3 way system.

-	4-inch, Kapton former voice coil
-	1600 Watt continuous program power handling
-	95 dB Sensitivity
-	35 Hz - 1 kHz Application range
-	Triple roll damped surround
-	Corrugated straight damped cone

Nominal Diameter	380/15	mm/inch
Rated Impedance	8	Ohm
Program Power	1600	Watts
Power handling capacity	800	Watts
Sensitivity 1W, 1m	95	dB
Frequency Range	35-1000	Hz
Effective Piston Diameter	325/12.8	mm/inch
Maximum Excursion Before Damage	36/1.4	mm/inch
Minimum Impedance	7.9	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	24/0.9	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	9/0.35	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Straight	ááá
Surround Material	Polycotton treat	ááá
Surround Design	Triple roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	38	Hz
DC resistance	Re	5.9	Ohm
Mechanical factor	Qms	6.8	ááá
Electrical factor	Qes	0.38	ááá
Total factor	Qts	0.35	ááá
BL factor	BL	21.2	T - m
Effective Moving Mass	Mms	121	gr
Equivalent Cas air load	Vas	139	liters
Effective piston area	Sd	0.083	m2
Max. linear excursion	Xmax	9.8	mm
Voice - coil inductance @ 1KHz	Le1k	2.2	mH
Half-space efficiency	Eff	1.93	%

MOUNTING INFORMATION

Overall Diameter	387/15.2	mm/inch
Bolt Circle Diameter	371	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	358/14.1	mm/inch
Rear Mount Baffle Cut-out	362/14.2	mm/inch
Depth	138/5.4	mm/inch
Volume occupied by the driver	3.4	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	11.7/25.7	Kg/lbs

RCF L15P540 Basslautsprecher 189,00 €

Very good power handling, excellent linearity and very low distortion.

Very efficient heat dissipation is ensured by a radiator that is part of the basket design. The air is forced in the radiator thanks to a dual sealed spider design.

Applications
The excellent linear response, well controlled down to 40 Hertz, makes the L15P540 especially suitable for horn-loaded applications, band-pass enclosures and small size bass reflex systems. It is a very good solution for two or three way system when a very high BL and maximum punch is required.

-	3-inch copper voice coil
-	1000 Watt continuous program power handling
-	98 dB Sensitivity
-	40 Hz - 2 kHz Frequency range
-	Dual spider design with silicon based dampening control
-	M-roll surround and exponential cone geometry

Nominal Diameter	380/15	mm/inch
Rated Impedance	8	Ohm
Program Power	1000	Watts
Power handling capacity	500	Watts
Sensitivity 1W, 1m	98	dB
Frequency Range	40-2000	Hz
Effective Piston Diameter	330/13	mm/inch
Maximum Excursion Before Damage	36/1.4	mm/inch
Minimum Impedance	6.8	Ohm
Voice Coil Diameter	76/3	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	18/0.7	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	50	Hz
DC resistance	Re	5.6	Ohm
Mechanical factor	Qms	9.7	ááá
Electrical factor	Qes	0.41	ááá
Total factor	Qts	0.39	ááá
BL factor	BL	21.4	T - m
Effective Moving Mass	Mms	106	gr
Equivalent Cas air load	Vas	100	liters
Effective piston area	Sd	0.085	m2
Max. linear excursion	Xmax	6.5	mm
Voice - coil inductance @ 1KHz	Le1k	1.5	mH
Half-space efficiency	Eff	2.94	%

MOUNTING INFORMATION

Overall Diameter	387/15.2	mm/inch
Bolt Circle Diameter	371	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	352/13.9	mm/inch
Rear Mount Baffle Cut-out	360/14.1	mm/inch
Depth	163/6.4	mm/inch
Volume occupied by the driver	3.8	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	9.5/20.9	Kg/lbs

RCF LF12G301 Basslautsprecher 155,00 €

Very good power handling, excellent linearity and very low distortion.

Copper voice coil construction, suspensions and cone materials designed to survive at 450 Watt RMS power.

Applications
The excellent linear response, well controlled down to 50 Hertz, makes the LF12G301 especially suitable for band-pass subwoofers and small size bass reflex systems. It is a very good solution for two or three way system when a good BL and punch is required.

-	3-inch, fibreglass former, inside-outside copper voice coil
-	900 Watt continuous program power handling
-	97 dB Sensitivity
-	40 Hz - 2 kHz Frequency range
-	M-roll surround and exponential cone geometry

Nominal Diameter	300/12	mm/inch
Rated Impedance	8	Ohm
Program Power	900	Watts
Power handling capacity	450	Watts
Sensitivity 1W, 1m	97	dB
Frequency Range	40-2000	Hz
Effective Piston Diameter	260/10.2	mm/inch
Maximum Excursion Before Damage	36/1.4	mm/inch
Minimum Impedance	7.2	Ohm
Voice Coil Diameter	76/3	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	18.5/0.7	mm/inch
Number of layers	2	ááá
Kind of layer	Inside/Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	43	Hz
DC resistance	Re	5.8	Ohm
Mechanical factor	Qms	4.6	ááá
Electrical factor	Qes	0.23	ááá
Total factor	Qts	0.22	ááá
BL factor	BL	19	T - m
Effective Moving Mass	Mms	56	gr
Equivalent Cas air load	Vas	97	liters
Effective piston area	Sd	0.053	m2
Max. linear excursion	Xmax	6.8	mm
Voice - coil inductance @ 1KHz	Le1k	2.0	mH
Half-space efficiency	Eff	3.23	%

MOUNTING INFORMATION

Overall Diameter	320/12.6	mm/inch
Bolt Circle Diameter	293-304	mm
Bolt Hole Diameter	6.5/0.3	mm/inch
Front Mount Baffle Cut-out	282/11.1	mm/inch
Rear Mount Baffle Cut-out	284/11.2	mm/inch
Depth	138/5.4	mm/inch
Volume occupied by the driver	2.6	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	7.3/16.2	Kg/lbs

RCF L8S800 Basslautsprecher 112,00 €

Very high linearity and low distortion are special features of this carbon-fibre cone transducer.

The use of an RCF exponential carbon fibre cone of exceptional strength and light weight drastically reduces the break-up, thus ensuring a high level of efficiency and excellent transient response. The cone is completely water-repellent. Maximum care in the selection of the components and in the assembly process make the L8S800 an extremely reliable woofer.

Applications
The L8S800 is the ideal woofer for very compact, full range, bass reflex systems where a good balance between mid-bass linearity and low frequency extension is required. The light mass and mid-range extension is perfect for coupling to a small size driver or tweeter.

-	1.5-inch, Kapton former, copper voice coil
-	340 Watt continuous program power handling
-	93 dB Sensitivity
-	50 Hz - 4 kHz Frequency range
-	Exponential, high strength, carbon fibre cone
-	M-roll damped surround

Nominal Diameter	200/8	mm/inch
Rated Impedance	8	Ohm
Program Power	340	Watts
Power handling capacity	170	Watts
Sensitivity 1W, 1m	93	dB
Frequency Range	50-4000	Hz
Effective Piston Diameter	165/6.5	mm/inch
Maximum Excursion Before Damage	30/1.2	mm/inch
Minimum Impedance	7.3	Ohm
Voice Coil Diameter	38/1.5	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	15/0.6	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	7/0.3	mm/inch
Cone Material	Carbon fiber	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	60	Hz
DC resistance	Re	6.1	Ohm
Mechanical factor	Qms	4.1	ááá
Electrical factor	Qes	0.46	ááá
Total factor	Qts	0.41	ááá
BL factor	BL	10.3	T - m
Effective Moving Mass	Mms	21	gr
Equivalent Cas air load	Vas	22	liters
Effective piston area	Sd	0.021	m2
Max. linear excursion	Xmax	5.8	mm
Voice - coil inductance @ 1KHz	Le1k	0.9	mH
Half-space efficiency	Eff	1.00	%

MOUNTING INFORMATION

Overall Diameter	239/9.4	mm/inch
Bolt Circle Diameter	221	mm
Bolt Hole Diameter	6.4/0.3	mm/inch
Front Mount Baffle Cut-out	184/7.24	mm/inch
Rear Mount Baffle Cut-out	184/7.24	mm/inch
Depth	94/3.7	mm/inch
Volume occupied by the driver	0.8	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	3.1/6.8	Kg/lbs

RCF MB15H401 Mitten-Bass-Lausprecher 229,00 €

MB15H401

MID-BASS

The MB15H401 is a 15-inch woofer with linear frequency response cheracteristics and very high efficiency.

The MB15H401 uses a fibre loaded exponential cone assembly along with a high excursion triple roll, constant geometry surround.
The fiberglass former, inside / outside aluminum voice coil provides a very good power handling maintaining light moving mass and proper Q for bass alignment.
Demodulation ring for fastest time response and lowest distortion.

Applications

The MB15H401 is ideal for use in applications where is required good power handling, very high efficiency and linearity.
Is the ideal 15" woofer for mid-bass application in high power, compact 2 way system.
Thanks to his linearity, very easy to crossover compared to competitors 4" voice coil 15".
The robust mechanical design and optimised weight of the device make it desirable for use in fixed installation or portable professional loudspeaker sytem.

Features
4-inch, fiberglass inside/outside aluminum voice coil
1400W continuous program power handling
100 dB Sensitivity
40 Hz – 2 kHz Frequency range
Dual spider design with silicon based dampening control
Triple-roll surround and corrugated straight cone geometry
Aluminum demodulation ring

GENERAL SPECIFICATION
Nominal Diameter:	380 / 15 mm/inch
Rated Impedance:	8 Ω
Program Power:	1400 Watts AES
Power handling capacity:	700 Watts AES
Sensitivity:	100 dB
Frequency Range:	40 Hz	÷ 2000 Hz
Effective Piston Diameter:	340 / 13.4 mm/inch
Max Excursion Before Damage (peak to peak):	50 / 2.0 mm/inch
Minimum Impedance:	7.0 Ω
Voice Coil Diameter:	100 / 4 mm/inch
Voice Coil Material:	Aluminum
Voice Coil Winding Depth:	21 / 0.8 mm/inch
Number of layers:	2
Kind of layer:	inside / outside
Top Plate Thickness:	12 / 0.5 mm/inch
Cone Material:	No pressed pulp
Cone Design:	Curved
Surround Material:	Polycotton
Surround Design:	Triple roll

THIELE SMALL PARAMETERS
Resonance frequency:	44 Hz
DC resistance:	5.4 Ω
Mechanical factor:	4.8
Electrical factor:	0.32
Total factor:	0.30
BL Factor:	22.1 T · m
Effective Moving Mass:	107 gr
Equivalent Cas air load:	121 liters
Effettive piston area:	0.091 m²
Max. linear excursion (mathematical):	7.5 mm
Voice - coil inductance @ 1KHz:	1.9 mH
Half-space efficiency:	3.11 %

MOUNTING INFORMATION
Overall Diameter:	393 / 15.5 mm/inch
Bolt Circle Diameter:	371-376 / 14.6-14.8 mm/inch
Bolt Hole Diameter:	6.5 / 0.3 mm/inch
Front Mount Baffle Cut-out:	352 / 13.9 mm/inch
Rear Mount Baffle Cut-out:	360 / 14.2 mm/inch
Depth:	158 / 6.2
Volume occupied by the driver:	4.3 / 0.15 liters/ft³
Net Weight	12.2 / 26.8 Kg/Lbs

SHIPPING INFORMATION
Shipping Weight:	12.8 / 28.4 Kg/Lbs

RCF L15/554K Basslautsprecher 239,00 €

Very high efficiency and good linearity are distinctive features of this mid-bass woofer.

Kapton former voice coil, polycotton suspensions and treated cone guarantee the very high power handling of this transducer.

Applications
The L15/554 is designed to be mounted in compact size bass reflex enclosures. The good combination of voice coil length, very low mass weight and suspensions control makes the L15/554 a very good choice for high power 2 way systems. Thanks to a very high BL/Re ratio, small mechanical depth and a strong cone, the L15/554 is a good solution for horn loaded or hybrid horn loaded systems.

-	4-inch, Kapton former, copper voice coil
-	1200 Watt continuous program power handling
-	99 dB Sensitivity
-	40 Hz - 2 kHz Frequency range
-	M-roll damped surround
-	Exponential damped cone

Nominal Diameter	380/15	mm/inch
Rated Impedance	8	Ohm
Program Power	1200	Watts
Power handling capacity	600	Watts
Sensitivity 1W, 1m	99	dB
Frequency Range	40-2000	Hz
Effective Piston Diameter	325/12.8	mm/inch
Maximum Excursion Before Damage	44/1.73	mm/inch
Minimum Impedance	7.9	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	16/0.6	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	9/0.35	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	35	Hz
DC resistance	Re	6.6	Ohm
Mechanical factor	Qms	8.6	ááá
Electrical factor	Qes	0.25	ááá
Total factor	Qts	0.24	ááá
BL factor	BL	23	T - m
Effective Moving Mass	Mms	91	gr
Equivalent Cas air load	Vas	227	liters
Effective piston area	Sd	0.083	m2
Max. linear excursion	Xmax	5.8	mm
Voice - coil inductance @ 1KHz	Le1k	1.7	mH
Half-space efficiency	Eff	3.75	%

MOUNTING INFORMATION

Overall Diameter	387/15.2	mm/inch
Bolt Circle Diameter	371	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	358/14.1	mm/inch
Rear Mount Baffle Cut-out	362/14.2	mm/inch
Depth	138/5.4	mm/inch
Volume occupied by the driver	3.8	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	11.3/24.9	Kg/lbs

RCF L15P530 Basslautsprecher 179,00 €

Very high sensitivity, excellent linearity and very low distortion.

Very efficient heat dissipation is ensured by a radiator that is part of the basket design. The air is forced in the radiator thanks to a sealed spider design.

Applications
A very light moving mass, a curve response linear above 3 kHz makes the L15P530 a very good solution for high quality two or three way systems. The aluminum voice coil guarantee a very high efficiency in conjunction to a proper Q factor for a good bass response.

-	3-inch edgewound aluminum voice coil
-	700 Watt continuous program power handling
-	100 dB Sensitivity
-	40 Hz - 3 kHz Frequency range
-	Spider dampening treatment
-	M-roll surround and exponential cone geometry

Nominal Diameter	380/15	mm/inch
Rated Impedance	8	Ohm
Program Power	700	Watts
Power handling capacity	350	Watts
Sensitivity 1W, 1m	100	dB
Frequency Range	40-3000	Hz
Effective Piston Diameter	330/13	mm/inch
Maximum Excursion Before Damage	36/1.4	mm/inch
Minimum Impedance	5.9	Ohm
Voice Coil Diameter	76/3	mm/inch
Voice Coil Material	Aluminium	ááá
Voice Coil Winding Depth	18/0.7	mm/inch
Number of layers	1	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	45	Hz
DC resistance	Re	5.1	Ohm
Mechanical factor	Qms	7.5	ááá
Electrical factor	Qes	0.51	ááá
Total factor	Qts	0.48	ááá
BL factor	BL	15.3	T - m
Effective Moving Mass	Mms	83	gr
Equivalent Cas air load	Vas	160	liters
Effective piston area	Sd	0.085	m2
Max. linear excursion	Xmax	6.5	mm
Voice - coil inductance @ 1KHz	Le1k	1.45	mH
Half-space efficiency	Eff	2.76	%

MOUNTING INFORMATION

Overall Diameter	387/15.2	mm/inch
Bolt Circle Diameter	371	mm
Bolt Hole Diameter	8/0.3	mm/inch
Front Mount Baffle Cut-out	352/13.9	mm/inch
Rear Mount Baffle Cut-out	360/14.1	mm/inch
Depth	163/6.4	mm/inch
Volume occupied by the driver	3.8	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	9.5/20.9	Kg/lbs

RCF L12L750 Mitten-Bass-Lausprecher 248,00 €

Very high efficiency and extended linearity are special features of this mid-bass transducer.

Very efficient heat dissipation is ensured by a radiator that is part of the basket design. The aluminum voice coil offer a properly aligned Q factor and a very high sensitivity. A specially designed Shallow Triple-roll surround guarantee a very low midrange distortion. Fibreglass former voice coil, polycotton suspensions and treated cone provide the very high power handling.

Applications
The L12L750 is primary designed to be horn loaded in medium and long throw systems. The dust cap is inverted in order to minimize the cone distortion and for better coupling to a phase plug. When mounted in compact size bass reflex enclosures, the good combination of short voice coil, very low mass and suspensions control makes the L12L750 a very good choice for high power, 2 way, satellite applications.

-	4-inch, fibreglass former, edgewound aluminum voice coil
-	700 Watt continuous program power handling
-	101 dB Sensitivity
-	60 Hz - 2 kHz Frequency range
-	Shaped Shallow Triple-roll damped surround
-	Inverted dust cap

Nominal Diameter	300/12	mm/inch
Rated Impedance	8	Ohm
Program Power	700	Watts
Power handling capacity	350	Watts
Sensitivity 1W, 1m	101	dB
Frequency Range	60-2000	Hz
Effective Piston Diameter	260/10.2	mm/inch
Maximum Excursion Before Damage	40/1.6	mm/inch
Minimum Impedance	7.2	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Aluminium	ááá
Voice Coil Winding Depth	12/0.5	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	Triple roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	62	Hz
DC resistance	Re	5.2	Ohm
Mechanical factor	Qms	4.1	ááá
Electrical factor	Qes	0.29	ááá
Total factor	Qts	0.27	ááá
BL factor	BL	18.8	T - m
Effective Moving Mass	Mms	50	gr
Equivalent Cas air load	Vas	52	liters
Effective piston area	Sd	0.053	m2
Max. linear excursion	Xmax	3.5	mm
Voice - coil inductance @ 1KHz	Le1k	1.25	mH
Half-space efficiency	Eff	4.12	%

MOUNTING INFORMATION

Overall Diameter	320/12.6	mm/inch
Bolt Circle Diameter	300	mm
Bolt Hole Diameter	7/0.3	mm/inch
Front Mount Baffle Cut-out	286/11.3	mm/inch
Rear Mount Baffle Cut-out	284/11.2	mm/inch
Depth	146/5.7	mm/inch
Volume occupied by the driver	2.9	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	11.5/25.3	Kg/lbs

RCF L12P110K Mitten-Bass-Lausprecher 209,00 €

Very high efficiency and low distortion are special features of this mid-bass transducer.

Special treatments are applied to cone surface and surround for optimum dampening.

Applications
The L12P110K is specially designed for compact size bass reflex enclosures. The unique combination of short voice coil and very high BL/Re ratio makes the L12P100K a very good choice when fast and precise mid-bass reproduction is required. Very good for high power horn loaded applications.

-	4-inch, Kapton former, copper voice coil
-	1000 Watt continuous program power handling
-	101 dB Sensitivity
-	60 Hz - 2 kHz Frequency range
-	M-roll damped surround
-	Corrugated straight damped cone

Nominal Diameter	300/12	mm/inch
Rated Impedance	8	Ohm
Program Power	1000	Watts
Power handling capacity	500	Watts
Sensitivity 1W, 1m	101	dB
Frequency Range	60-2000	Hz
Effective Piston Diameter	260/10.2	mm/inch
Maximum Excursion Before Damage	48/1.9	mm/inch
Minimum Impedance	7.6	Ohm
Voice Coil Diameter	100/4	mm/inch
Voice Coil Material	Copper	ááá
Voice Coil Winding Depth	10.5/0.4	mm/inch
Number of layers	2	ááá
Kind of layer	Outside	ááá
Thickness Top Plate Depth	9/0.35	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	44	Hz
DC resistance	Re	5.6	Ohm
Mechanical factor	Qms	4.3	ááá
Electrical factor	Qes	0.14	ááá
Total factor	Qts	0.13	ááá
BL factor	BL	25	T - m
Effective Moving Mass	Mms	55	gr
Equivalent Cas air load	Vas	98	liters
Effective piston area	Sd	0.053	m2
Max. linear excursion	Xmax	3.0	mm
Voice - coil inductance @ 1KHz	Le1k	1	mH
Half-space efficiency	Eff	5.75	%

MOUNTING INFORMATION

Overall Diameter	312/12.3	mm/inch
Bolt Circle Diameter	295	mm
Bolt Hole Diameter	7/0.3	mm/inch
Front Mount Baffle Cut-out	285/11.3	mm/inch
Rear Mount Baffle Cut-out	283/11.2	mm/inch
Depth	115/4.5	mm/inch
Volume occupied by the driver	2.8	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	11.2/24.6	Kg/lbs

RCF MB12G301 Mitten-Bass-Lausprecher 155,00 €

Very high sensitivity, excellent linearity and very low distortion.

Voice coil construction, suspensions and cone materials designed to survive at 400 Watt RMS power.

Applications
A very light moving mass, a curve response linear above 3 kHz makes the MB12G301 a very good solution for high quality two or three way system. The aluminum voice coil guarantee a very high efficiency in conjunction to a proper Q factor for a good bass response.

-	3-inch inside-outside aluminum voice coil
-	800 Watt continuous program power handling
-	98 dB Sensitivity
-	50 Hz - 3 kHz Frequency range
-	M-roll surround and exponential cone geometry

Nominal Diameter	300/12	mm/inch
Rated Impedance	8	Ohm
Program Power	800	Watts
Power handling capacity	400	Watts
Sensitivity 1W, 1m	98	dB
Frequency Range	50-3000	Hz
Effective Piston Diameter	260/10.2	mm/inch
Maximum Excursion Before Damage	38/1.49	mm/inch
Minimum Impedance	7.2	Ohm
Voice Coil Diameter	76/3	mm/inch
Voice Coil Material	Aluminium	ááá
Voice Coil Winding Depth	16/0.6	mm/inch
Number of layers	2	ááá
Kind of layer	Inside/Outside	ááá
Thickness Top Plate Depth	10/0.4	mm/inch
Cone Material	No pressed pulp	ááá
Cone Design	Curved	ááá
Surround Material	Polycotton	ááá
Surround Design	M - roll	ááá

THIELE - SMALL PARAMETERS

Resonance frequency	Fs	53	Hz
DC resistance	Re	5.4	Ohm
Mechanical factor	Qms	4.7	ááá
Electrical factor	Qes	0.28	ááá
Total factor	Qts	0.27	ááá
BL factor	BL	17	T - m
Effective Moving Mass	Mms	48	gr
Equivalent Cas air load	Vas	72	liters
Effective piston area	Sd	0.053	m2
Max. linear excursion	Xmax	5.5	mm
Voice - coil inductance @ 1KHz	Le1k	0.7	mH
Half-space efficiency	Eff	3.69	%

MOUNTING INFORMATION

Overall Diameter	320/12.6	mm/inch
Bolt Circle Diameter	293-304	mm
Bolt Hole Diameter	6.5/0.3	mm/inch
Front Mount Baffle Cut-out	282/11.1	mm/inch
Rear Mount Baffle Cut-out	284/11.2	mm/inch
Depth	138/5.4	mm/inch
Volume occupied by the driver	2.6	liters/ft3

BAFFLE CUTOUT DIAMETER

Net Weight	7.3/16.2	Kg/lbs