Blue-Music/Boxenbau/18 Zoll ChassisArtikel

18NLW9600 Eighteensond Chassis 4 Ohm 599,00 €

# 96,5 dB SPL 1W / 1m average sensitivity
# 135 mm (5.3 in) Interleaved Sandwich Voice coil (ISV)
# 1800 Watt AES power handling
# High force neodymium magnet assembly
# Triple Silicon Spider (TSS) for improved excursion control and linearity
# Single Demodulating Rings (SDR) for lower distortion
# Low noise forced ventilation design for low power compression
# Weather protected cone and plates for outdoor usage
# Suitable for reflex, bandpass or horn loaded high SPL subwoofer systems

he 18NLW9600 is an extended low frequency 18 inch neodymium high performance transducer. The loudspeaker has been designed for use as a subwoofer component, in either a reflex, bandpass or horn loaded configuration, in high power auditorium or arena loudspeaker systems.
For optimum results recommended amplifier should be able to deliver 3600 Watt program power without clipping.
Eighteen Sound engineers have obtained the best possible results with today's available materials in terms of clean and undistorted LF reproduction at a ultra high SPL, with the lowest possible power compression figure.
The transducer design features include a large displacement suspension system specifically designed for matching the carbon fiber reinforced, straight ribbed cone.
Thanks to the Triple Silicon Spider (TSS) technology, the 18NLW9600 is able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes the 18NLW9600 an extremely low distortion, highly dynamic transducer.
The state-of-the-art 5,3" inside outside ISV (Interleaved Sandwich Voice Coil) aluminum voice coil enables the 18NLW9600 to handle 3600W program power value.
The 18NLW9600 has been developed after intense FEA and fluidodynamics simulation and testing, focusing on dissipating the heat generated by the powerful voice coil. Special attention was given to the optimization of air flow into the gap without introducing audible noise. A special low-density material air diffractor placed into the heatsink acts as a cooling system, increasing the power handling capability and lowering the power compression figure.
The exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the cone. A special coating applied to both the top and back plates makes the transducer far more resistant to the corrosive effects of salts and oxidization.

GENERAL SPECIFICATIONS
Nominal Diameter 462mm (18 in)
Rated Impedance 4 ohms
AES Power 1800W
Program Power (1) 3600W
Peak Power (2) 10000W
Sensitivity (3) 96,5 dB
Frequency Range (4) 32 - 2500 Hz
Power Compression @ -10 dB (5) 0.7 dB
Power Compression @ -3 dB 1.3 dB
Power Compression @ 0 dB 2.2 dB
Max Recomm. Frequency 300 Hz
Recomm. Enclosure Volume 110 ÷ 350 lt. (3,88 ÷ 12,36 cuft)
Max Peak To Peak Excursion 70 mm (2,75 in)
Voice Coil Diameter 135 mm (5,32 in)
Voice Coil Winding Material aluminum
Suspension Triple Roll Polycotton
Cone Straight Ribbed, Treated Paper
THIELE SMALL PARAMETERS (6)
Fs 34 Hz
Sd 0,1134 sq.mt. (189,9 sq.in.)
Qms 8,7
Qes 0,29
Qts 0,28
Vas 149 lt. (5,1 cuft)
Mms 261 gr. (0,58 lb)
BL 30 Tm
Linear Mathematical Xmax (7) ±14 mm (±0,55 in)
Le (1kHz) 2,11 mH
Ref. Efficiency 1W@1m (half space) 95,1 dB
MOUNTING INFORMATIONS
Overall diameter 462 mm (18,18 in)
N. of mounting holes 8
Mounting holes diameter 8,5 mm (0,33 in)
Bolt circle diameter 440mm (17,32 in)
Front mount baffle cutout diameter 416 mm (16,38 in)
Rear mount baffle cutout diameter 422 mm (16,61 in)
Total depth 237,5 mm (9,3 in)
Flange and gasket thickness 26 mm (1,02 in)
Net weight 12,5 kg (27,6 lb)
Shipping weight 14 kg (30,9 lb)
CardBoard Packaging dimensions 482 x 482 x 257 mm (19 x 19 x 10,1 in)

BMS 18S430 18" Subwoofer 1200 W 8 Ohm 296,00 €

96 dB Sensitivity 1 W / 1 m
1.200 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high output Subwoofers

BMS 18N860 18" Neodymium Subwoofer 1500 W 8 Ohm 660,50 €

95 dB Sensitivity 1 W / 1 m
1500 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Subwoofers

BMS 18N850 18" Neodymium Lautsprecher 1200 W 8 Ohm Vers 647,10 €

95 dB Sensitivity 1 W / 1 m
1.200 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Subwoofers
Leight Weight Carbon Fiber Diaphragm

BMS 18N850 18" Neodymium Lautsprecher 1200 W 8 Ohm 647,10 €

95 dB Sensitivity 1 W / 1 m
1.200 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Subwoofers
Leight Weight Carbon Fiber Diaphragm

BMS 18N850 18" Neodymium Lautsprecher 1200 W 4 Ohm Vers 870,00 €

95 dB Sensitivity 1 W / 1 m
1.200 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Subwoofers
Leight Weight Carbon Fiber Diaphragm

BMS 18N850 18" Neodymium Lautsprecher 1200 W 4 Ohm 545,00 €

95 dB Sensitivity 1 W / 1 m
1.200 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Subwoofers
Leight Weight Carbon Fiber Diaphragm

BMS 18N830 18" Neodymium Lautsprecher 1100 W 8 Ohm Vers 453,70 €

96 dB Sensitivity 1 W / 1 m
1.100 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Suwoofers

BMS 18N830 18" Neodymium Lautsprecher 1100 W 8 Ohm 425,00 €

96 dB Sensitivity 1 W / 1 m
1.100 W Power Handling
4" Copper Sandwich Voice Coil for low Power Compression
Neodymium Magnet System
Double treated Cone for Water Protection
Triple Aluminum demodulating Rings for ultra low Distortion
Optimal for high Output Suwoofers

Eighteensound 18NLW9600 Driver 8 Ohm 599,00 €

97 dB SPL 1W / 1m average sensitivity
135 mm (5.3 in) split winding four layers ISV aluminum voice coil
3600 W program power handling
High force neodymium magnet assembly
Triple Silicon Spider (TSS) for improved excursion control
Single Demodulating Ring (SDR) for lower distortion
Low noise forced ventilation design
Weather protected cone and plates for outdoor usage
Suitable for reflex, bandpass or horn loaded high SPL subwoofer systems

Eighteensound 18NLW9400 Driver 369,00 €

98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
2400 Watt program power handling
High grade neodymium magnet assembly
Double Silicon Spider (DSS) for increased excursion control and linearity
Recommended for subwoofer usage in compact vented or bandpass enclosures
Weather protected cone and plates for outdoor usage

Eighteensound 18NLW9000 Driver 495,00 €

97 dB SPL 1W / 1m average sensitivity
135 mm (5.3 in) ISV aluminum voice coil
3600 W program power handling
High grade neodymium magnet assembly
Double Silicon Spider (DSS) technology
Low noise forced ventilation design reduces power compression
Weather protected cone and plates for outdoor usage
Suitable for vented and bandpass high SPL subwoofer systems

Eighteensound 18ND9300 Driver 459,00 €

98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000 W AES power handling
Neodymium magnet assembly
Weather protected cone and plates for outdoor usage
Double Silicon Spider (DSS) for improved excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Improved heat dissipation via unique basket design

Eighteensound 18LW2400 Driver 299,00 €

98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
2400 W program power handling
Double Silicon Spider (DSS) for superior excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Improved heat dissipation via multi-cell air diffractor and multiple backplate vents
Weather protected cone and plates for outdoor usage
Ideal for high SPL subwoofer designs

Eighteensound 18LW1400 Driver 295,00 €

98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000W AES power handling
Double Silicon Spider (DSS) for improved excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Improved heat dissipation via unique basket design and multiple backplate vents
Weather protected cone and plates for outdoor usage
Ideal for high SPL subwoofer designs

Eighteensound 18LW1250 Driver 274,00 €

98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000 W AES power handling
Double Silicon Spider (DSS) for improved excursion control and linearity
Weather protected cone and plates for outdoor usage
Improved heat dissipation via unique basket design and backplate vents
Suitable for high SPL subwoofer design

18-Sound 18W1300 LF Ferrite Treiber 309,00 €

99,5 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000 W continuous pink noise power handling
Weather protected cone and plates for outdoor usage
Double Silicon Spider (DSS) for improved excursion controland linearity
Double Demodulating Rings (DDR) for lower distortion andimproved heat dissipation
Improved heat dissipation via unique basket design

GENERAL SPECIFICATIONS
Nominal Diameter	460 mm (18 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	1000 W
Continuous Power (2)	600 W
Program Power (3)	1200 W
Peak Power (4)	6000 W
Sensitivity (5)	99,5 dB
Frequency Range (6)	38 - 3300 Hz
Power Compression @-10dB (7)	0,7 dB
Power Compression @-3 dB	2,1 dB
Power Compression @Full Power	3,2 dB
Max Recomm. Frequency	500 Hz
Recomm. Enclosure Volume	150 ÷ 350 lt. (5,3 ÷ 12,36 cuft)
Minimum Impedance	6,4 Ohm at 25°C
Max Peak To Peak Excursion	50 mm (1,97 in)
Voice Coil Diameter	100 mm (4 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

The 18W1300 is a low frequency loudspeaker which sets a new industry standard in 18" (460 mm) high output transducers. It represents a further development of the Eighteen Sound 18LW1400 but with a lighter mass and increased sensitivity.
The 18W1300 can be used as a low bass or sub-woofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at very high power levels. In its reflex configuration, it can also be used for bass musical instrument applications.
The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enable the 18W1300 to achieve high levels of linear travel while maintaining full control over the moving mass.
The carbon fiber reinforced curvilinear ribbed cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress.
The state-of-the-art voice coil employs our own Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy, creating an extremely linear motor assembly. The already low distortion and unmistakable sound quality of this loudspeaker is improved by Double Demodulating Rings (DDR), designed to dramatically reduce the intermodulation and harmonic distortion while improving the transient response.
Excellent heat dissipation has been achieved by incorporating air channels between the basket and the magnetic top plate.
Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, which have been researched and designed using our in-house magnetic flux FEA CAD resource.
Due to the increasing use of high power audio systems at outdoor events or in marine environments, the 18W1300 has been designed to perform properly under inclement weather conditions. This has been achieved using of an exclusive cone treatment which improves pulp strength and gives water repellent properties to both sides of the cone. In addition, a special treatment is applied to the top and back plates which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.

Faital 18XL1600 18" Lautsprecher 1600W 8Ohm 472,90 €

Nominal Specifications

Nominal Diameter 18", 460 mm
Overall Diameter 18.11", 460 mm
Bolt Circle Diameter 17.32", 440 mm
Baffle Cutout Diameter 16.6", 422 mm
Depth 9.09", 231 mm
Flange and Gasket Thickness 0.55", 14 mm

Electrical Specifications

Minimum Impedance 7.2 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,600 W
Maximum Power Handling**** 3,200 W
Sensitivity (1W/1m) 98 dB
Frequency Range 30 - 1500 Hz
Voice Coil Diameter 4", 100 mm
Winding Material Copper
Former Material Glass Fiber
Winding Depth 1.23", 31.3 mm
Magnetic Gap Depth 0.61", 15.5 mm
Flux Density 1.05 T

THIELE & SMALL Parameters

Resonant Frequency (fs) 32 Hz
DC Resistance (Re) 5.4 Ohm
BL Product (BL) 26.7 N/A
Diaphragm Mass inc. Airload (Mms) 240 grams
Mechanical Compliance of Suspension (Cms) 0.1 mm/N
Rms 5.27 Kg/s
Electromagnetic Q (Qes) 0.37
Mechanical Q (Qms) 9.3
Total Q (Qts) 0.36
Compliance Equivalent Volume (Vas) 6.9 ft³, 195.5 dm³
Surface Area of Cone (Sd) 182"², 1,174 cm²
Maximum Linear Excursion (Xmax)* 13 mm
Xdamage** 28 mm
Coil Inductance (Le) 1.45 mH
Diaphragm mass (Mmd) 217 g
Eta Zero 1.76 %

Notes

*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power

Faital 18HP1040 18" Lautsprecher 1000W 8Ohm 368,80 €

Nominal Specifications

Nominal Diameter 18", 460 mm
Overall Diameter 18.11", 460 mm
Bolt Circle Diameter 17.32", 440 mm
Baffle Cutout Diameter 16.61", 422 mm
Depth 7.95", 202 mm
Flange and Gasket Thickness 0.55", 13.9 mm

Electrical Specifications

Minimum Impedance 6.6 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,000 W
Maximum Power Handling**** 2,000 W
Sensitivity (1W/1m) 99 dB
Frequency Range 38 - 2500 Hz
Voice Coil Diameter 4", 100 mm
Winding Material Aluminium
Former Material Glass Fiber
Winding Depth 0.9", 23 mm
Magnetic Gap Depth 0.47", 12 mm
Flux Density 1.3 T

THIELE & SMALL Parameters

Resonant Frequency (fs) 38 Hz
DC Resistance (Re) 5.5 Ohm
BL Product (BL) 24.5 N/A
Diaphragm Mass inc. Airload (Mms) 163 grams
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
Rms 4.42 Kg/s
Electromagnetic Q (Qes) 0.35
Mechanical Q (Qms) 8.75
Total Q (Qts) 0.34
Compliance Equivalent Volume (Vas) 7.37 ft³, 208.8 dm³
Surface Area of Cone (Sd) 180.7"², 1,166 cm²
Maximum Linear Excursion (Xmax)* 9.5 mm
Xdamage** 17.5 mm
Coil Inductance (Le) 1.36 mH
Diaphragm mass (Mmd) 141 g
Eta Zero 3.14 %

Notes

*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power

Faital 18HP1020 18" Lautsprecher 1000Watt 8Ohm 356,90 €

Nominal Specifications

Nominal Diameter 18", 460 mm
Overall Diameter 18.11", 460 mm
Bolt Circle Diameter 17.32", 440 mm
Baffle Cutout Diameter 16.61", 422 mm
Depth 7.95", 202 mm
Flange and Gasket Thickness 0.55", 13.9 mm

Electrical Specifications

Minimum Impedance 6.6 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,000 W
Maximum Power Handling**** 2,000 W
Sensitivity (1W/1m) 99 dB
Frequency Range 35 - 1600 Hz
Voice Coil Diameter 4", 100 mm
Winding Material Copper
Former Material Glass Fiber
Winding Depth 0.9", 23 mm
Magnetic Gap Depth 0.47", 12 mm
Flux Density 1.3 T

THIELE & SMALL Parameters

Resonant Frequency (fs) 35 Hz
DC Resistance (Re) 5.4 Ohm
BL Product (BL) 27.2 N/A
Diaphragm Mass inc. Airload (Mms) 182 grams
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
Rms 4.1 Kg/s
Electromagnetic Q (Qes) 0.29
Mechanical Q (Qms) 9.74
Total Q (Qts) 0.28
Compliance Equivalent Volume (Vas) 7.74 ft³, 219.2 dm³
Surface Area of Cone (Sd) 180.7"², 1,166 cm²
Maximum Linear Excursion (Xmax)* 9.5 mm
Xdamage** 17.5 mm
Coil Inductance (Le) 1.7 mH
Diaphragm mass (Mmd) 159.5 g
Eta Zero 3.1 %

Notes

*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power